12
CLEANING CD
If the CD skips or will not play , the disc may need cleaning .
Before playing, wipe the disc from the centre out with a cleaning
cloth. After playing, store the disc in its case.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly wiping
with a soft cloth.
IMPORTANT NOTE
If an abnormal display indication or an operating problem
occurs, disconnect the AC power cord and remove the batteries.
Wait at least 5 seconds, then reconnect the AC power cord or
reinstall the batteries.
WARNING
Should the CD door be opened before the reading of the CD
FRPSOHWHG D MDPPLQJ QRLVH PD\ RFFXU 7KLV LV UHVROYHG E\
closing the CD door.
MAINTENANCE
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow several
times on the lens and remove the dust with the brush. Finger prints
may be removed with a cotton swab moistened with alcohol.
BBS
1.
Press MENU button repeatedly
unit BASS shown on the display.
2. Press PLAY/PAUSE to enter
Bass Boost setting mode.
3. Press MENU to select
" BASS ON " or " BASS OFF ".
3UHVV3/$<3$86(WRFRQ¿UP
The bass boost on / off is changed cyclically by pushing
BBS button on remote control.
INTRO
In CD and USB mode, press the intro button on the remote control to
SOD\RQO\WKH¿UVWVHFRQGVRIHDFKWUDFNRQWKHGLVF
Press the INTRO button again to switch off intro.
FOLDER
SELECTION
1.
In STOP mode, press BAND/FOLDER button will skip to the next folder.
2.
This operation valid for all media of MP3,WMA and USB operation.
ID3
Display
1.
Press MENU button repeatedly unit ID3 shown on the display.
2. Press PLAY/PAUSE to enter ID3 setting mode.
3. Press MENU to select " ID3 ON " or " ID3 OFF ".
3UHVV3/$<3$86(WRFRQ¿UP
