7
Command Control via the Network
Communication Port
The following two ports are assigned for the command control.
TCP #23
TCP #9715
Command Control Settings
&RQ¿JXUHWKHIROORZLQJLWHPVIRUPDZHEEURZVHUZKHQFRPPDQGFRQWUROLVXVHG
When the authentication setting is enabled, the following settings are required.
Command Control via the Network
Port Settings
Netowrk Control
Port1 (Port: 23)
Port open
Click the
[Enable]
check box to open
[Network
Control Port1 (Port: 23)]
to use TCP #23.
'HIDXOWVHWWLQJLV³(QDEOH´
Authentication
Click the
[Enable]
check box for the
[Authentication]
setting when authentication
is required.
'HIDXOWVHWWLQJLV³'LVDEOH´
Network Control
Port2 (Port: 9715)
Port open
Click the
[Enable]
check box to open
[Network
Control Port2 (Port: 9715)]
to use TCP
#9715.
'HIDXOWVHWWLQJLV³(QDEOH´
Authentication
Click the
[Enable]
check box for the
[Authentication]
setting when authentication
is required.
'HIDXOWVHWWLQJLV³(QDEOH´
Security Settings
Network Control
Authentication
Password
Enter the desired authentication password.
This setting will be the same for
[Network
Control Port1 (Port: 23)]
and
[Network
Control Port2 (Port: 9715)]
.
'HIDXOWVHWWLQJLVEODQN
Re-enter
Authentication
Password
