Hitachi CP2155TA, Руководство по обслуживанию

Страница: 5 / 58

4
USER GUIDE USER GUIDE
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
Switching On.
The television powers up into its last operating state, i.e. ‘On’
or ‘Standby’. If the television is in standby press any numeric
key or the TV key
b
on the hand unit to switch on.
Tuning
Automatic tuning may be performed from the ‘SETUP’ menu.
(
See "Automatic Tuning" below
).
Manual tuning and Fine tuning may be performed from the
‘MANUAL’ menu.
(See "Manual Tuning" below)
.
Menus
Menus are selected using the coloured keys: RED for Audio
controls, GREEN for Picture controls, YELLOW for
Programme controls (tuning related) and CYAN for Features
To select an item from a menu use the
'
key to move the
cursor (highlighted block) upwards or
$
to move it down
To adjust the selection use the
%
or
&
key to decrease or
increase the setting accordingly. These keys also perform
the function of moving the cursor left or right when required
to do so.
Normally, to leave a menu and return to TV viewing press
the TV key
b
.
Programme Menu
Press the YELLOW key - This gives an overview, in tabular
form, of all sixty programme locations.
For each of the sixty programme locations the programme
number will be displayed followed by the programme name,
four red dashes or four white dashes. The red dashes signify
that no programme has been tuned and stored there, whilst
the white dashes signify a programme has been tuned and
stored in that location during automatic tuning.
Use the
%
,
&
,
'
or
$
keys to select a programme.
Note: only thirty programmes can be displayed on the screen
at a time, either programmes 0 - 29 or 30 - 59. Use
%
or
&
key to change the display as necessary.Set-up Menu
From the Programme menu press the YELLOW key to select
SETUP menu.
Automatic tuning.
To automatically tune all TV stations press the CYAN key
from the SETUP menu. This causes the TV to find all
stations and assign them to individual programme locations.
Note: Whilst automatic tuning is taking place it can be
cancelled by pressing the CYAN key; this will abandon all
the stations tuned since the automatic tuning was initiated.
Manual tuning
To manually tune TV stations press the GREEN key from the
SETUP menu. This allows TV stations to be tuned and
stored in any programme location 0 - 59.
TUNE - for manual tuning up or down the band, depending
on whether the
%
(down) or
&
(up) key is pressed, and
automatically defeat of automatic frequency control (AFC).
SEARCH - this initiates a search for the next TV station
down or up the band depending on which key is pressed,
%
(down) or
&
(up). If AFC has been defeated by manual
tuning then AFC will be re-applied to tune the current station.
BAND - the band may be changed using this option,
although the switch is not made until search or manual
tuning is made.
STORE - this is used to save the current tuning information,
including AFC defeat indication and band etc., for the
selected programme.
Audio Menu
To access audio controls press the GREEN key from the
SETUP menu.
From this menu volume, balance, treble, bass, sound mode
and spatial may be adjusted. If headphone option is present
and configured then headphone volume and balance may
also be adjusted
MODE - This allows the sound mode to be
changed, according to the type of broadcast or
external source that is available, to FM Mono, FM
Stereo, FM Dual Language I, FM Dual Language
II, AV Stereo ,AV Dual Language 1 and AV Dual
Language II.
Note: Not all modes are available simultaneously
Picture Menu
Press the GREEN key. Brightness, contrast, colour,
sharpness and hue (optional) may be adjusted.
STORE - this is used to save the new picture
settings.
Features Menu
Press the CYAN key. From this menu the source selection
may be changed, the child lock (local control buttons) may
be enabled/disabled and the sleep timer set/reset.
Sound Mode
Press the
3
key, when not in menu mode, to change
sound mode to mono, stereo, dual language I or dual
language II according to the type of broadcast.
Changing Picture Source
To select AV1, AV2, RGB or TV source for viewing (actual
sources available depend on the model), repeatedly press
the
2
key (when not in menu mode) until the appropriate
source is selected, as indicated in the top left corner of the
screen
(see "On-Screen Symbols" below)
. Alternatively, the
source may be changed from the features menu.
Text/Mix Modes
Pressing the
,
key from TV picture mode selects TEXT
mode. Further depressions of this key toggles the TV
between TEXT and MIX modes.
To return to TV picture mode press the
b
key.
Normalise
Press
L
key, while not in menu mode, to set the
brightness, contrast, colour and sharpness controls to
approximately mid-position.
Status Display
An on-screen indication of the current programme number
and name, together with the status of various operating
modes are given when the
0
key is pressed
(see "On-
Screen Symbols" below)
.