Hitachi CP-X417W(C14-30AWL), Руководство по обслуживанию

Страница: 28 / 108

28
CP-X417W (C14-30AWL)
6-4 Battery
1. Turn the projector off, and unplug the power cord.
Allow the projector to cool sufficiently.
2. After making sure that the projector has cooled adequately, pull the slot cover
forward, pushing slightly its edge up, and remove it from the projector.
3. Remove the battery case.
Hold the battery case gutter by finger nail or other thing and pull out the battery
case slowly from the battery slot.
4. Take the old battery out from the battery case.
5. Replace a new battery.
Replace battery with HITACHI MAXELL, Part No.CR2032 only.Use of another
battery may present a risk of fire or explosion.
Put a new battery into battery case. Please make sure that the + is facing
upward. Insert the battery case slowly into the battery slot until you hear the
snap.
6. Close the slot cover.
Replace the slot cover by reversing the procedure used when removing the
cover.
WARNING
Always handle the batteries with care and use them only as directed. Battery may explode if mistreated.
Do not recharge, disassemble or dispose of in fire.
And also improper use may result in cracking or leakage, which could result in fire, injury and/or pollution
of the surrounding environment.
• Be sure to use only the batteries speci
fi ed. Do not use batteries of different types at the same time.
Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
If the battery is placed in the battery holder upside-down, it may be hard to remove.
• Keep a battery away from children and pets. If swallowed consult a physician immediately for emergency
treatment.
• Do not short circuit or solder a battery.
• Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the liquid adheres
to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
6-4-1 Replacing Internal Clock Battery
Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has stopped,
please replace the battery according to the following procedures.
Slot Cover
Battery Slot
Battery Case
Battery
Battery
Case
Battery
Case
Battery (+)
Battery (-)
NOTE
• The internal clock's time will be reset when the battery is removed. Please recon fi gure the time via the
menu or a web browser after replacing the battery.