20
Power on/off
Precaution for lens cover attachment and removal
When you attach or remove the lens cover, move it vertically up and down while
keeping the knob to the right as illustrated in the figure.
►A strong light is emitted when the projector’s power is on.
Do not look into the lens of the projector or look inside of the projector through
any of the projector’s openings.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
WARNING
1.
Press the
STANDBY/ON
button on the projector or the remote control.
The message “Power off?” will appear on the screen for about 5 seconds.
Turning off the power
2.
Press the
STANDBY/ON
button again while the message appears.
The projector lamp will go off, and the
POWER
indicator will begin blinking in
orange. Then
POWER
indicator will stop blinking and light in steady orange
when the lamp cooling is complete (
100
).
3.
Attach the lens cover, after the
POWER
indicator turns in steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
• Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
• This projector has the function that can make the projector automatically turn
on/off. Please refer to the DIRECT POWER ON (
53
) and AUTO POWER
OFF (
54
) items of the OPTION menu.
NOTE
