background image

1

ENGLISH

WARNING

  

►Before using this product, be sure to read all manuals for this 

product. After reading them, store them in a safe place for future reference.

►Heed all the warnings and cautions in the manuals or on the product.

►Follow all the instructions in the manuals or on the product.

First of all ............................................

2

  Entries and graphical symbols explanation ......

2

  Important safety instruction ..............................

2

Regulatory notices ..............................

3

  About Electro-Magnetic Interference ................

3

 

 About Waste Electrical and Electronic Equipment ...

4

Contents of package...........................

4

Preparing for the remote control .........

5

Arrangement .......................................

6

Connecting with your devices .............

7

Fastening the adapter cover ...............

8

Connecting power supply ...................

9

Turning on the power ........................

10

Adjusting the projector's elevator .....

11

Displaying the picture .......................

12

Turning off the power ........................

13

Replacing the lamp ...........................

14

Cleaning and replacing the air filter ..

16

Using the CD manual .......................

17

Specifications ...................................

18

Troubleshooting 

 

  - Warranty and after-service ...........

19

Contents

NOTE

  • In this manual, unless any comments are accompanied, “the 

manuals” means all the documents provided with this product, and “the product” 

means this projector and all the accessories came with the projector.

LCD Projector

CP-X2542WN/CP-X3042WN/CP-X3542WN/

CP-X4042WN/CP-WX3042WN/CP-WX4042WN

User's Manual (concise)

Thank you for purchasing this projector.

Please read through this manual before using this product, in order to use safely 

and utilize well the product.

Содержание CP-WX3042WN





















Отзывы: