21
Status Monitor
In error state
The Status Monitor displays a warning of an error with
larger letters. Resolve the errors referring to the table
of the sections "
Related messages
" (
117 ~ 119
)
and
"
Regarding the indicator lamps
"
(
120
~
122
)
when the
warning is displayed.
Displayed warnings are as below;
COVER: The lamp cover has not been properly fixed.
Refer to the
LAMP
indicator blinking in the table
(
120
)
.
FAN: The cooing fan is not operating.
Refer to the
TEMP
indicator blinking in the table
(
121
)
.
LAMP: The lamp does not light.
Refer to the
LAMP
indicator lighting in the table
(
120
)
.
TEMP: The projector's interior becomes over heated.
Refer to the
TEMP
indicator lighting in the table
(
121
)
.
AIR (AIR FLOW): The internal temperature is rising.
Refer to the description of the message, "CHECK THE AIR FLOW" in the
table
(
118
)
.
COLD: There is a possibility that the interior portion has become over cooled.
Refer to the
LAMP
and
TEMP
indicators alternatively blinking in the table
(
122
)
.
FILTR (FILTER): It is time to clean the air filter.
Refer to the
LAMP
and
TEMP
indicators simultaneous blinking in the table
(
122
)
.
• When one of the warnings of FAN, LAMP, COVER, TEMP errors is
displayed, the backlight blinks at the same time.
NOTE
Displaying the condition of the projector (continued)
: Displays supplied voltage and peripheral temperature in Celsius
while the lamp is on.
3rd line
• While the projector is searching an input signal or
USB TYPE A
ports
are selected in normal condition, nothing is displayed on the 2nd line of the
monitor.
• When the
USB TYPE B
port is selected even if MOUSE is selected in the
USB TYPE B item of the OPTION menu, "NO SIGNAL" is displayed on the 2nd
line of the monitor (
70
).
• Displayed temperature might differ from actual peripheral temperature
because the displayed temperature is measured inside of the projector.
NOTE
example
O R
C E
V
