Hitachi CP-S210 series, Руководство по обслуживанию

Страница: 30 / 66

30
CP-S210 (C10S)
Setup of Filter time (“ON” or “OFF”)
1. Select the “FILTER TIME” on the OSD using button “ ” .
Next press the “ ” to select “FILTER TIME MENU” by the SERVICE MENU.
������������
����
��������
�������
�������
��������
����
�����������
����������
����������
������������
�����������
��
���
2. ON : Select the “ON” on the OSD using button “ ”.
OFF : Select the “OFF” on the OSD using button “ ”.
3. The OSD will be ended by no operation for 10 seconds or change of input signal. To end immediately, use one
of buttons except buttons “ ”, “ ”, “ ”, “ ”.
Set operating time display method (accumulated lamp time display method)
1. Select [Option] from the [Menu] display, then select [Lamp Time].
2. Press the [Reset] button once, then press [Keystone] for 3 seconds or more to display the screen shown
below. (The menu will close after 10 seconds if there are no further operations.)
3. Use “ ” or “ ” to select the usage status number. (The usage status is as shown below.)
������
��������
�����
����������������
�����������������
����
Usage status number (See below)
Usage status number
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before seventh reset
Time
Number of times on
Number of times off