background image

47

 SECURITY menu 

This projector is equipped with security functions.

From the SECURITY menu, items shown in the table 

below can be performed.

To use SECURITY menu: User registration is required 

before using the security functions.

 Enter the SECURITY menu

 

1.  Use the 

/

 buttons on the SECURITY menu to select ENTER PASSWORD and press the 

 

button. The ENTER PASSWORD box will be displayed.  

2.  Use the 

/

/

/

 buttons to enter the registered password. The 

factory default password is 

9776

. This password can be changed 

(

 

 

 

 SECURITY PASSWORD CHANGE). Move the cursor to the 

right side of the ENTER PASSWORD box and press the 

 button 

to display the SECURITY menu.

• It is strongly recommended the factory default password to be 
changed as soon as possible.
• If an incorrect password is input, the ENTER PASSWORD box 
will be displayed again. If incorrect password is input 3 times, the 
projector will turn off. Afterwards the projector will turn off every time 
an incorrect password is input.

3.  Items shown in the table below can be performed.

 If you have forgotten your password

 

(1).  While the ENTER PASSWORD box is displayed, press and hold 

the 

RESET

 button on the remote control for about 3 seconds or 

press and hold the 

INPUT

 button for 3 seconds while pressing the 

 button on the projector.

(2).  The 10 digit Inquiring Code will be displayed. Contact your dealer 

with the 10 digit Inquiring Code. Your password will be sent after 
your user registration information is con

fi

 rmed.

• If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will 
close. If necessary, repeat the process from (1).  

Item

Description

 SECURITY 

PASSWORD 

CHANGE 

(1)  Use the 

/

 buttons on the SECURITY menu 

to select SECURITY PASSWORD CHANGE 
and press the 

 button to display the ENTER 

NEW PASSWORD box.

(2)  Use the 

/

/

/

 buttons to enter the new password.

(3)  Move the cursor to the right side of the 

ENTER NEW PASSWORD box and press the 

 button to display the NEW PASSWORD 

AGAIN box, enter the same password again. 

(4)  Move the cursor to the right side of the NEW 

PASSWORD AGAIN box and press the 

 

button and the NOTE NEW PASSWORD box 
will be displayed for about 20 seconds, please 
make note of the password during this time.

Pressing the 

ENTER

 button on the remote control or 

 button on the 

projector will close the NOTE NEW PASSWORD box.

• Please do not forget your password.

 SECURITY menu 

 SECURITY menu 

 (continued on next page) 

Содержание CP-RX80 - XGA LCD Projector


































































Отзывы: