Hitachi CP-A100 Series Скачать руководство пользователя страница 37

Страница: 37 / 114

CP-A100 / ED-A100 / ED-A110 (A1DN)

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Lighting

In Orange

Turned

off

Turned

off

The projector is in a standby state.

Blinking

In Green

Turned

off

Turned

off

The projector is warming up.

Please wait.

Lighting

In Green

Turned

off

Turned

off

The projector is in an on state.

Ordinary operations may be performed.

Blinking

In Orange

Turned

off

Turned

off

The projector is cooling down.

Please wait.

Blinking

In Red

(discre-

tionary)

(discre-

tionary)

The projector is cooling down. A certain error has been detected.

Please wait until the POWER indicator finishes blinking, and then perform the proper

measure using the item descriptions below.

Blinking

In Red

Lighting

In Red

Lighting

In Red

Turned

off

The lamp does not light, and there is a possibility that interior portion has become

heated.

Please turn the power off, and allow the projector to cool down at least 20 minutes.After

the projector has suf

ciently cooled down, please make con

rmation of the following items,

and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air

lter dirty?

• Does the peripheral temperature exceed 35ºC?

If the same indication is displayed after the remedy, please change the lamp referring to

the section “Lamp”.

Blinking

In Red

Lighting

In Red

Blinking

In Red

Turned

off

The lamp cover has not been properly

xed (attached).

Please turn the power off, and allow the unit to cool down at least 45 minutes. After the

projector has suf

ciently cooled down, please make con

rmation of the attachment state of

the lamp cover. After performing any needed maintenance, turn the power on again.

Lighting

In Red

Turned

off

Turned

off

The lens door is not opened or closed properly.

One of the followings has been happened.

• The lens door is not opened properly, when the projector is turned on.

• The lens door is not closed properly, when the projector is turned off.

• The lens door position is shifted, while the projector is working.

Restart the projector, after confirming that there is nothing that the lens door hits while

opening or closing.

Blinking

In Red

Lighting

In Red

Turned

off

Blinking

In Red

The cooling fan is not operating.

Please turn the power off, and allow the unit to cool down at least 20 minutes. After the

projector has suf

ciently cooled down, please make con

rmation that no foreign matter has

become caught in the fan, etc., and then turn the power on again.

If the same indication is displayed after the remedy, please replace a fan.

Blinking

In Red

Lighting

In Red

Turned

off

Lighting

In Red

There is a possibility that the interior portion has become heated.

Please turn the power off, and allow the unit to cool down at least 20 minutes. After the

projector has sufficiently cooled down, please make confirmation of the following items,

and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air

lter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy, please set the FAN SPEED of the

SERVICE item in the OPTION menu to HIGH.

Lighting

In Green

Alternative

blinking in Red

There is a possibility that the interior portion has become overcooled.

Please use the unit within the usage temperature parameters (5°C to 35°C). After the

treatment, resent the power to ON. If the same indication is displayed after the treatment,

please make sure that the proper cables are connected to each of connectors E301, E302

and E304 on the PWB assembly MAIN.

Lighting

In Green

Simultaneous

blinking in Red

It is time to clean the air

lter.

Please immediately turn the power OFF, and clean or change the air

lter referring to the

section “Air Filter”. After cleaning or change the air

lter, please be sure to reset the

lter

timer. After the remedy, resent the power to ON.

Blinking

in Green

for approx.

3 seconds

Turned

off

Turned

off

At least 1 "Power ON" schedule is saved to the projector.

(

Please refer to the User's Manual Network Functions: Schedule Setting for more

information)

NOTE

• When the interior portion has become overheated, for safety purposes, the power source is automati-

cally turned off, and the indicator lamps may also be turned off. In such a case, press the “

○

” (OFF) side of the

power switch, and wait at least 45 minutes. After the projector has suf

ciently cooled down, please make con-

rmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

6-14 Regarding the indicator lamps

Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings

as described in the table below. Please respond in accordance with the instructions within the table.

Содержание CP-A100 Series



















































































































Результаты поиска

Содержание CP-A100 Series

Отзывы:

Похожие инструкции для CP-A100 Series

Бренды по названию

Популярные бренды

Hitachi CP-A100 Series, Руководство по обслуживанию

Результаты поиска

Содержание CP-A100 Series

Отзывы:

Похожие инструкции для CP-A100 Series

Бренды по названию

Популярные бренды