Hitachi Compute Blade 500 Series, Руководство пользователя

Страница: 122 / 506

5
.
Select <Deactivate> of "TPM State", and press Enter. <Enable> is
displayed, and press Enter again.
TPM is activated after rebooting the server blade.
Date and Time
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Table 2-89 Data and Time menu items
Menu items Selection Description
System Date Increases or decreases the
setting value using [+], [-]
keys.
Sets the local date of the system. Sets the
date as mm/dd/yyyy.
System Time Increases or decreases the
setting value using [+], [-]
keys.
Sets the local time of the system. Sets the
time as hh:mm:ss in the form of 24 hours.
Start Options
Select an item to boot, and press Enter.
Select a target device to set boot, and press Enter. The target device will be
booted first.
The items to be displayed may be different depending on the setting of Boot
Manager.
For the details, see Boot Manager on page 2-102 .
Boot Manager
Select an item to display or set, and press Enter.
Note: Do not change the settings of the following item. If you change the
settings in a poor attempt, UEFI may not start up.
• Boot From File
• Boot From Device
• UEFI Shell
The following table shows description of menu items displayed in the left side
of the window.
Select an item to set, and press Enter.
2-102
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide