Hitachi Compute Blade 2500, Руководство по началу работы

Страница: 75 / 154

In the navigation area, the Modules tree view is displayed.
2
.
In the Modules tree view, select the desired server blade.
In the application area, the Server Blade n Information view is
displayed. The variable n represents a unique number identifying a server
blade.
3
.
In the Server Blade n Information view, click the State tab, and from
the Server Blade Operation menu, select Reset.
Using the CLI console to reset the power of a server blade
Execute the
reset blade
command. For more information about the
reset
blade
command, see the Hitachi Compute Blade 2500 Series Management
Module User Guide.
Using the remote console to reset the power of a server blade
1
.
Start the remote console and log in to the desired server blade.
2
.
In the Power menu, click Hard Reset.
Related topics
• The section on the
reset blade
command in the manual Hitachi Compute
Blade 2500 Series Management Module User Guide
• Functionality of the remote console on page 5-7
Restarting the BMC of a server blade
If a failure occurs in the server blade, restart the BMC of the server blade.
You can restart the BMC from the Web console or CLI console. Restart the
BMC only if a failure has occurred in the server blade.
Restarting the BMC from the Web console
You must first log in to the management module via the Web browser on the
system console.
1
.
From the global task bar of the Web console, select the Resources tab.
In the navigation area, the Modules tree view is displayed.
2
.
In the Modules tree view, select the desired server blade.
In the application area, the Server Blade n Information view is
displayed. The variable n represents a unique number identifying a server
blade.
3
.
In the Server Blade n Information view, select the BMC tab and click
the Restart BMC button.
Starting the CB 2500 and Performing Initial Setup
3-13
Hitachi Compute Blade 2500 Series Getting Started Guide