− 3 −
Stand assembling
■ Assembling Steps
1.
Turn the base cover over so the underside
is facing up.
2.
Insert the stand pipes into the base cover.
3.
Use the included screws to stabilize the
stand pipes.
Screws (4 x 8)
Stand pipe
Base cover
Screws (4 x 8)
Stand pipe
Stand attaching to the Plasma Display
■
Normal Installation
Step 1. With the plasma display lying flat, insert and secure the two Installation bolts 1 (M8 x 20) in the holes "a" located in the
plasma display housing.
At this point, tighten these bolts 1 only until the threads are no longer visible when viewed from t he side (you will be
unable to attach the display if the bolts are screwed in completely).
Plasma display
Installation bolt 1 (M8 x 20)
Holes "a"
(holes in center of plasma display)
Installation bolt 1
Plasma display housing
Stop screwing down the bolt
when the threads are no
longer visible.
◆
◆
Regarding the stand pipe screw holes when the stand is used as a desktop stand
C
B
A
C´
B´
A´
B
A
C´
B´
A´
C
Specifications
Screw holes used with
stand orientation
Normal use
B, B'
With optional speakers attached to
both sides of display
