Hitachi CM827U, Руководство пользователя

Страница: 14 / 29

1 - 7
ENGLISH
CAUTIONS (Continued)
For the Customers in the UK
THIS PRODUCT IS SUPPLIED WITH A 2-PIN MAINS PLUG FOR USE ON MAINLAND
EUROPE. FOR THE UK PLEASE REFER TO THE NOTES ON THIS PAGE.
IMPORTANT FOR UNITED KINGDOM
WORDING FOR CLASS EQUIPMENT INSTRUCTION BOOKS AND LABELS
The mains lead on this equipment is supplied with a molded plug incorporating a fuse, the
value of which is indicated on the pin face of the plug. Should the fuse need to be replaced,
an ASTA or BSI approved BS 1362 fuse of the same rating must be used. If the fuse cover
is detachable, never use the plug with the cover omitted. If a replacement fuse cover is
required, ensure it is of the same color as visible on the pin face of the plug. Fuse covers
are available from your dealer.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the
power outlets in your home or the cable is too short to reach a power outlet, obtain an
appropriate safety approved extension lead, or consult your dealer.
Changing the mains plug, if necessary, should be carried out by an qualified electrician.
If there is no alternative to cutting off the mains plug, ensure that you dispose of it
immediately, having first removed the fuse, to avoid a possible shock hazard by inadvertent
connection to the mains supply.
WARNING: THIS EQUIPMENT MUST BE GROUNDED
IMPORTANT
The wires in the mains lead are colored in accordance with the following code:
Green and Yellow = Ground, Blue = Neutral, Brown = Live.
Green & Yellow to Ground Brown to Live
Fuse
Blue to Neutral Cord Clamp
As these colors may not correspond with the colored markings identifying the terminals in
your plug, proceed as follows:
The wire which is colored GREEN and YELLOW must be connected to the terminal in the
plug which is marked with the letter E or by the earth symbol
or colored GREEN or
GREEN and YELLOW.
The BLUE colored wire must be connected to either N-marked terminal or the BLUE or
BLACK colored terminal. The BROWN colored wire must be connected to either L-marked
terminal or the BROWN or RED colored terminal.