Hitachi CM823FET, Руководство пользователя

Страница: 15 / 25

1 - 13
EN
G
L
ISH
OPERATION (Continued)
Table 1-1. Adjustment Table (Continued)
Item Adjustment
button
Function
(MAIN MENU)
OSD EXIT
(no function)
clears the OSD. (YES)
ZOOM
shrinks the picture horizontally and vertically.
expands the picture horizontally and vertically.
SCREEN MENU
changes to the previous mode.
H. MOIRE HEMISPHERE
V. LIN. BALANCE
V. LINEARITY
V. CONV.
H. CONV.
BOTTOM CORNER
TOP CORNER
V. FOCUS
H. FOCUS
V. MOIRE H. MOIRE
changes to the next mode.
H. MOIRE V. MOIRE
H. FOCUS
V. FOCUS
TOP CORNER
BOTTOM CORNER
H. CONV.
V. CONV.
V. LINEARITY
V. LIN. BALANCE
HEMISPHERE H. MOIRE
H. MOIRE
makes the operation of the horizontal moiré
changing circuit weaker.
makes the operation of the horizontal moiré
changing circuit stronger.
V. MOIRE
makes the operation of the vertical moiré
changing circuit weaker.
makes the operation of the vertical moiré
changing circuit stronger.
(Continued on the next page.)
NOTE:
* Moire may appear on the screen due to interference between CRT dot pitch and video signal due
to the settings of video image, display size, display brightness, etc. Adjust the settings of the
display size, display brightness, etc., before adjusting moire.
* In some cases, this function may cause deterioration of the display quality, such as focus, jitter,
etc.
* If as an advanced user, you decide to use an external degaussing coil (other than the degaussing
function included in the digital controls of the monitor) it is strongly suggested that the monitor be
turned off. If you leave the monitor on while using the external degaussing coil it may cause the
monitor to produce uneven colour.