n
NEVER REMOVE THE REAR COVER !
The rear cover MUST be removed only by authorised service personnel. This colour monitor
c o n t a i n s h i g h v o l t a g e c o m p o n e n t s .
n
THE POWER POINT SHOULD BE CLOSE TO THE MONITOR AND
EASILY ACCESSIBLE !
n
INSTALL THE UNIT IN AN SUITABLE ENVIRONMENT !
NOT expose this monitor to rain or moisture to prevent electric shock or fire hazard.
This unit
is designed to be used in an office or business environment.
DO NOT subject the unit to vibrations, dust, or corrosive gases.
n
KEEP IN A WELL VENTILATED PLACE !
DO NOT cover this monitor or place anything against any sides (not only the top, right and left side
b u t a l s o t h e r e a r a n d b o t t o m s i d e ) o f u n i t .
Ventilation holes are provided
all sides of the rear
cover to prevent the temperature from rising.
n
KEEP AWAY FROM HEAT SOURCES !
A V O I D p l a c i n g t h e u n i t i n d i r e c t s u n s h i n e o r n e a r a h e a t i n g a p p l i a n c e .
n
BE CAREFUL OF MAGNETIC FIELDS !
DO NOT place a magnet, loudspeaker system, floppy disk drive, printer, or anything which will
g e n e r a t e m a g n e t i s m n e a r t h e u n i t .
A magnetic field may cause blurred colours or distortion of the
d i s p l a y e d p a t t e r n .
n
BE CAREFUL OF GENERATED MAGNETISM !
After the power has been turned on or “DEGAUSS” button has been pressed, the CRT is
demagnetised for approximately 10 seconds. This generates a strong magnetic field around the
front cover which may affect the data stored on magnetic tape or disks near the front cover.
P l a c e
such magnetic recording equipment and tapes/disks away from this unit.
n
AMBIENT ILLUMINATION
Avoid direct rays of the sun or room lighting onto the CRT screen in order to prevent eye fatigue.
n
THE ENCLOSED POWER CORD MUST BE USED !
In Europe, a proper European standard approved power cord is to be used with this monitor.
F o r a
rated current up to 6 A, a type not lighter than
3G 0.75
or
3G 0.75
must be used.
In USA/Canada, use a UL
LABELLED or CERTIFIED power cord set meeting the
f o l l o w i n g s p e c i f i c a t i o n s
Rating: min.
7A
Length: max.
T y p e : S V T o r S J T
Plug type: NEMA
figure, Parallel blade, Grounding type,
Failure to do so may cause fire or electric shock hazard.
n
USE ONLY THE CORRECT VOLTAGE POWER OUTLET WITH SAFETY
GROUND CONNECTION !
100 120 V for USA, Canada, etc.
200 240 V for Europe, etc.
( T h i s m o n i t o r w i l l a u t o m a t i c a l l y a d j u s t t o t h e i n p u t v o l t a g e 1 0 0
1 2 0 2 0 0 2 4 0 V . )
2
