Hitachi CM615ET, Руководство по обслуживанию

Страница: 7 / 53

6
J-6. Preset Timing Adjustment
1. Input each PRESET MODE timing, and use front control key adjust the display to the normal position
and size, and wait for 5 seconds.
2. Switch to next timing repeat 1 process. Until every PRESET MODE timing have been adjusted.
J-7. Timing And Pattern
Timing mode pattern.mdnm/
1 VESA 68.6k CROSS HATCH
2 VESA 68.6K 2" SQUARE
3 VESA 68.6K FULL WHITE
J-8. Power Saving Function Check
The power source is 230Vac input
When remove the sync signal, the monitor should enter suspend mode and then off mode.
When power saving, the power consumption of monitor should be less than: suspend mode 8w off mode
The monitor recovering time from suspend mode or off mode to on mode should be less than 5 seconds.
TABLE 1
TIMING MODE PATTERN
1. 64K 51 CROSSHATCH
2. 37.8K/60HZ 51 CROSSHATCH
3. 60K Full-white
4. 60K
5
×
2
″
squares
5. 68K “me”
6. 68K
5
×
2
″
squares