Hitachi CL2554AN Скачать руководство пользователя страница 3

For your own protection, please read these safety instructions completely before operating the appliance, and keep
this manual for future reference.
Carefully observe all warnings, precautions, and instructions on the appliance, and those described in the operating
instructions, and adhere to them.

INSTALLATION

Water and Moisture : 
Do not use mains power operated
sets near water, for example near a
bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or
near a swimming pool etc.

Accessories : 
Do not place the set on an unstable
trolley, stand, tripod, bracket or
table. The set may fall, causing
serious injury to a child or adult and
serious damage to the set. Use only
a trolley, stand, tripod, bracket  or
table recommanded by the manufac-
turer.  

Ventilation : 
The slots and openings in the
cabinet are provided for necessary
ventilation. To ensure reliable
operation of the set, and to protect it
from overheating, these slots and
openings must never be blocked or
covered.

Never cover the slots and openings
with a cloth or any other materials.

Never  block the slots and openings
by placing the set on a bed, sofa, rug
or other similar surface. 

Never place the set in a confined
space such as a bookcase, or built-
in cabinet, unless proper ventilation
is provided.

Do not place the set near or over a
radiator, heat source or where it is
likely to be exposed to direct
sunlight.

Power Cord Protection : 
Route the power cord so that it is
unlikely to be walked on pinched by
items placed on or against it, paying
particular attention to the plugs,
receptacles, and the point where the
cord exits from the appliance.

USE

Power sources : 
This set should be operated only
from the type of power source
indicated on the marking label. If you
are not sure of the type of electrical
power supplied at your home,
consult your dealer or local power
company. For those sets designed to
operate from battery power, or other
sources, refer to the operating ins-
tructions.  

Overloading : 
Do not overload wall outlets,
extension cords or convenience
receptacles beyond their capacity,
since this can result in fire or electric
shock. 

Object and Liquid Entry : 
Never allow objects or liquid to enter
the interior of the set as this may
result in damage to the set, cause an
electric shock or even cause a fire.

Attachments : 
Do not use attachments not recom-
mended by the manufacturer, as
they may cause hazards.

Cleaning : 
Unplug the set from the mains
before cleaning. Do not use liquid
cleaners or aerosols. Use a cloth
lightly dampened with water for
cleaning the exterior of the set.  

SERVICE

Damage Requiring Service : 
Unplug the set from the wall outlet
and refer servicing to qualified
service personnel under the
following conditions.

When the power cord or plug is
damaged or frayed. 

If liquid has been spilled or objects
have fallen into the set.

If the set has been exposed to rain
or water.

If the set has been subject to
excessive shock by being dropped
or the cabinet has been damaged.

If the set does not operate normally
when following the operating instruc-
tions. Adjust only those controls that
are specified in the operating ins-
tructions. Improper adjustment of
other controls may result in damage
and will often require extensive work
by a qualified technician to restore
the set to normal operation. 

When the set exhibits a distinct
change in performance this indicates
a need for service.

Servicing :
Please do not attempt to repair or
service this set yourself as removal
of the back cover could expose you
to dangerous voltages.

Replacement Parts : 
When replacement parts are
required, be sure the service techni-
cian has used replacement parts
specified by the manufacturer that
have the same characteristics as the
original parts. Unauthorized substi-
tutions may result in fire, electric
shock or other hazards.

Safety Check : 
Upon completion of any service or
repair to the set, ask the service
technician to perform routine safety
checks (as specified by the manu-
facturer) to determine that the set is
in a safe operating condition.

IMPORTANT SAFEGUARDS

G B

Содержание CL2554AN














Отзывы: