Hitachi CL-8800BF, Инструкция по эксплуатации

Страница: 4 / 8

- 5 -
Preparations Before Cutting
1. Place a vinyl sheet or a sheet of newspaper on the floor.
Use a chair as high as possible for ease of haircut work.
2. Apply powder to the neck, place tissue paper,
and wrap around with a towel.
3. Put on a cape from the front and fasten it
with a string.
★
If a suitable cape is not available, substitute
a nylon wrapping cloth or the like.
Names of Hair Parts
Crown
Sidewall
Sideburn
Nape
- 6 -
Haircut
Short hair
1. Cutting of crown.
Pull up hair between fingers directly perpen-
dicular to top of head and slowly run the unit
above fingers to cut.
To ensure cutting at the same length, take up hair
already cut together with hair to be cut and cut
latter to the same length as the former.
2. Trimming along the ears.
Put the blade edge lightly against the
skin and move it in a circle in the arrow
direction.
Hold the ear by hand to facilitate the job.
3. Side trimming.
Put the blade edge at right angles to
the skin to trim the hair.
4. Shaving downy hair.
Put the blades directly on the skin and
shave the downy hair working from
the lower to the upper part of the neck.
Do not press the blades too hard.
Rounded corners
are safe for the skin.
Nape Sideburn