Hitachi CJ 14DL, Технические данные и руководство по обслуживанию, Страница: 4 / 44

-1-
*: Based on our own research
Highest cutting capacity in the class*
The number of wood cutting operations per battery charge by the Models CJ 14DL and CJ 18DL is 1.3
times greater than C-1 and C-2 thanks to the efficient transmission of the cutting energy. For details, refer
to “Cutting number comparisions per charge” on page 10.
Lightest in the class*
The Models CJ 14DL, CJ 18DL, CJ 14DMR and CJ 18DMR are lightest in weight in the class.
Equipped with the new lithium-ion battery
Each of the Types BCL 1430 and EBM 1830 lithium-ion batteries is equipped with the overdischarge
protection circuit, overload protection circuit, and voltage monitoring circuit for each cell to prevent
reduction of the battery life due to overdischarge (overuse) or overcharge (excessive charging) of the
battery. The number of charging/discharging is about 1,500.
Precautions for use of the Types BCL 1430 and EBM 1830 lithium-ion batteries
Each of the Types BCL 1430 and EBM 1830 lithium-ion batteries is equipped with a protective function that
automatically stops output to extend the battery life. The motor may stop automatically in either of the
following case
1 or 2 even if the switch is depressed continuously during operation. This is because the
protective function is activated. The battery is not faulty.
1 The motor may stop automatically when the remaining battery level is low (when the battery voltage is
decreased to about 8 V (Type BCL 1430)/when decreased to about 12 V (Type EBM 1830)). Charge the
battery immediately in such case.
2 The motor may stop if the Model CJ 14DL/CJ 18DL is overloaded. In such case, release the switch and
eliminate the cause of the overload problem. Then the Model CJ 14DL/CJ 18DL is operable.
Tool-less blade changing system
The blade can be easily changed by opening/closing the lever. Usable blade is only the BOSCH's blade
whose thickness at the attaching portion is 1.5 mm or less or an equivalent blade having the same shape.
1) Open the lever fully. (Fig. )
2) Detach the blade from the blade holder.
3) Attach the new blade in the blade holder by pushing as far
as it will go. (Fig. )
4) Close the lever. (Fig. )
SELLING POINT DESCRIPTIONS
Maker HITACHI
Model CJ 14DL/CJ 14DMR/CJ 18DL/CJ 18DMR
B-1 B-2 C-1 C-2
Weight 2.3 kg / 2.5 kg / 2.4 kg / 2.7 kg 2.9 kg 3.2 kg 2.7 kg 2.8 kg
Lever
Blade holder
Blade