Hitachi CFM1, Руководство пользователя

Страница: 7 / 7

SYMPTOM
The Coffee Mill does not
operate.
Grind quality is poor.
POSSIBLE CAUSE
Appliance is not
plugged in.
The cup quantity control
is set to ”off”.
The safety cut-out has
operated.
Fuse needs replacing.
Grinding mechanism is
dirty.
SOLUTION
Check that the Coffee
Mill is plugged in
properly.
Turn this control to
1-12 cups.
Leave to cool for 10
minutes. Make sure
operating cycles do
not exceed 1 minute.
Make sure the grand
coffee container has
not been overfilled.
Empty and leave to
cool for 10 minutes.
Replace the 3A fuse.
Clean the grinding
mechanism.
Troubleshooting and specifications
TROUBLESHOOTING SPECIFICATIONS
AC supply: 230V ~ 50Hz
Power input: 85W
Unit dimension: 170 (L) x 100 (W) x 250 (H)
We continually strive to improve our products,
specifications may change without prior notice.
Note: This product is exclusively available through Dixons
Stores Group. In the unlikely event of a problem with your
product please return to the store where your purchase was
made.
Partmaster Direct can provide accessories, spares, batteries
and replacement parts with Next Day Delivery available upon
request.
Please call: 0870 600 1338 (UK customers only)
Calls charged at National Rate…or visit our website at
www.partmaster.co.uk