4
STANDARD ACCESSORIES
1
Carbide Tipped Saw Blade .................................... 1
(Mounted on the unit)
2
Box Wrench .............................................................. 1
3
Side Handle ............................................................... 1
4
Guide .......................................................................... 1
5
Eye Protection ........................................................... 1
The
1
tipped saw blade may not be included depending
on the prodact type and must be purchased separately.
Standard accessories are subject to change without notice.
7.
When cutting, hold the body of the metal cutter
firmly.
8.
While using the metal cutter, keep the tipped saw
blade, rotating parts and the saw dust exit aperture
away from the hands and face.
9.
When making a cut, do not try to pull the metal
cutter out of the cut while it is running. Turn off
the power switch first and wait until the blade
completely stops rotating before taking the metal
cutter out of the cut.
10.
If the tipped saw does not seem to operate
normally or makes abnormal sounds, stop using
the tipped saw immediately and contact an
Authorized Hitachi Service Center for inspection
Voltage
110V
Power input
1140W
No-load speed
4300/min
Max. cutting depth
62.5 mm
Saw blade
185 mm (external dia.)
×
1.6 mm (thickness)
×
20 mm (hole dia.)
Weight (without cord)
4.4 kg
SPECIFICATIONS
and repair.
11.
If the metal cutter is accidentally dropped or
bumped, carefully examine the frame, tipped saw,
etc. to see that there are no cracks, deformation
or any other damage.
12.
Make sure that material to be cut is firmly fixed
in place.
13.
Keep flaminable and easily damaged objects away
when cutting metal.
14.
Do not use the metal cutter to cut hard metal
materials for long continuous periods of time.
15.
Do not use cutting oil when cutting materials with
the metal cutter.
1
1. Carbide tipped saw blade: Thin,
soft steel material cutting
Use: For cutting soft steel
materials.
Dimensions:
2. Carbide tipped saw blade: Thin,
soft steel material cutting (Low
noise type)
Use: For cutting soft steel
materials.
Dimensions:
3. Carbide tipped saw blade:
Aluminum sash material cutting.
Use: For cutting aluminum sash
materials.
Dimensions:
OPTIONAL ACCESSORIES (sold separately)
Outer
Hole
Tip
Thickness of
Number
diameter
diameter
width
saw blade
of teeth
185 mm
20 mm
2 mm
1.6 mm
48 teeth
Outer
Hole
Tip
Thickness of
Number
diameter
diameter
width
saw blade
of teeth
185 mm
20 mm
2 mm
1.6 mm
48 teeth
Outer
Hole
Tip
Thickness of
Number
diameter
diameter
width
saw blade
of teeth
185 mm
20 mm
2 mm
1.5 mm
60 teeth
3
2
4
5
