39
CH SURF FUNCTION
Ǐ
Mode 12
ǐ
Follow the steps on page 21 to enter the
Function
menu and
select the
Multi Picture
option, then enter the
Multi Picture
menu and select the
CH Surf
option as shown on the right.
Press the
Ż Ź
cursor buttons to set the
CH Surf
option to
mode
12
, then exit from the menu.
ƽ
In normal TV mode, press the
CH SURF
button to enter
mode
12
(12-picture) as shown below.
The 12 pictures will rotate to refresh individual program
after a few seconds starting from the program No.0 except
for those skipped program. If the preset channels are less
than 12, it will display the actual number of searched
program. If the preset channels are more than 12, use the
Page up/down
buttons to select the next group of
program.
ƽ
In this mode, you can press the
Ÿ ź
Ż Ź
cursor buttons
to select one of the pictures, and the program No. of the
selected picture will turn from white to green. If you press
the
ENTER
button to quit, the selected picture will fill the
entire TV screen.
ƽ
In this mode, directly entering the program No. by using
the number buttons will quit this mode, and the selected
picture will fill the entire TV screen.
ƽ
In this mode, there will be no signal output from the
speakers and the monitor out terminals.
ƽ
In this mode, press the
CH SURF
or the
RETURN
button to quit. If you enter the menu by pressing the
MENU
button, it will exit from this mode.
ƽ
In this mode, the
A/B
,
SWAP
and
POSITION
buttons are invalid.
The
Strobe
function is as shown below.
Follow the steps on page 21 to enter the
Function
menu and select the
Multi Picture
option, then enter the
Multi
Picture
menu and select the
Freeze
option. Press the
Ż Ź
cursor buttons to set the
Freeze
option to
Strobe
, then
exit from the menu.
ƽ
In normal TV mode, press the
FREEZE
button to enter the mode
12
automatically. The 12
th
picture will display
the current active program. The other 11 pictures will display the continuous freeze frames of the TV program
captured at the moment you press
FREEZE
. This function is not valid for all input signal formats. When
ʽ
Not
Available
appears, it is invalid.
ƽ
In this mode, you can quit by pressing the
RETURN
or the
FREEZE
button.
ƽ
In this mode, you can enter the
Audio
menu to perform the adjustment. However, if you enter other menus such
as
Picture
, it will exit from this mode.
ƽ
The monitor out terminals will output the video and audio signals from the current active program.
ƽ
In this mode, the
A/B
,
SWAP
and
POSITION
buttons are invalid.
䗝乍
Ϟϔ义
䆒ᅮ
0XOWL3LFWXUH
0XOWL3LFWXUH
3LQ3
&+6XUI
)UHH]H
6WLOO
5HVHW
6HOHFW
6HW
5HWXUQ
ź
Ź
