Hitachi C24W1TN, Инструкция по эксплуатации, Страница: 9 / 28

Automatic T
Automatic T
uning Procedure
uning Procedure
Page9
Page9
Use either cursor key 18 or 19 to begin
AUTOTUNE.
Use cursor key 17 or 21 to highlight
AUTOTUNE.
Main Menu
Picture
Audio
Sound Mode
Feature
Install
Install
Autotune
Manual Tune
Program Sort
Language
Autotune
00
VIDEO CH37 I
01 BBC2 515.25 I
02 ITV 528.30 I
03 BBC1 544.65 I
04 CH5 566.55 I
05 CH4 572.10 I
=Select =Adjust Menu =Exit
= Select = Adjust Menu = Exit
Menu = Exit
English
Completed Autotune example.
If language setting is incorrect, use cursor keys
17 or 21 to highlight LANGUAGE, and select
using cursor keys 18 and 19.
NOTE: Make sure the Handset foldout section (Page 3) is extended out for easy referencing.
To automatically tune this TV to your local broadcasting stations follow the step by step guide below. Once the TV has found
all your local stations, they are then automatically assigned into the following order
1. BBC1; 2. BBC2; 3. ITV; 4. CH4/S4C;
5.CH5 (subject to availability); 6. Cable / Satellite broadcasts.
Alternatively, if you are familiar with local broadcasting frequency or CH numbers, then these can be entered manually. Please
refer to the Manual Tuning Procedure section of this manual.
IMPORTANT NOTE: If you have a VCR or a Satellite receiver connected to this TV please ensure that they are switched
on before Autotune commences. In the case of a VCR, insert a pre-recorded tape and begin playback of your equip-
ment. With a Satellite receiver, select SKY NEWS. These measures ensure your equipment is tuned in during the AUTO-
TUNE procedure. (satellite equipment installation is explained in the “EXTERNAL EQUIPMENT CONNECTION “section).
To ensure the INSTALL option is displayed the MENU key
(20) must be held for approximately 5 seconds.
Press cursor key 18 or 19 to select INSTALL.
The INSTALL menu (centre right) is shown.
Highlight INSTALL using cursor keys 17 or 21
(if INSTALL is not shown follow step above once more).
Press and HOLD the MENU key (20) on your
handset until the menu right (top) appears.