Hitachi C1426R, Инструкция по эксплуатации

Страница: 11 / 17

GB - 10 -
Feature Menu
• To enter the Feature menu directly, press the “ YELLOW ”
button, or
• Press " " button, now you are in Main menu. In the Main
menu, select FEATURE using “ “ or “ ” button. Then enter
the Feature menu pressing “ ” or “ ” button.
Sleep Timer
As you enter the Feature menu, SLEEP TIMER will be the first
selected option. Use “ ” or “ ” button to change the Sleep
Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00,
1:15:00, 1:30:00, 1:45:00 and 2:00:00 .
It is displayed on the upper right of the screen. If sleep timer
is activated it is displayed with the TV status and erased with
it after 3 seconds.
6/((37,0(5
&+,/'/2&.
/$1*8$*(
2))
2))
(1*/,6+
If there is only one minute left of the countdown of the timer, it
is displayed automatically on the upper right of the screen, and
stayed there until finishing. Then TV goes automatically to
stand-by.
Child Lock
You can use this feature to prevent children turning on TV or
changing programs or adjustments etc. without remote con-
trol.
The
CHILD LOCK feature can be set by “ ” or “ ” button to
either ON or OFF . When OFF is selected, there will be no differ-
ence in the operation of your TV. When ON is selected, the TV
can only be controlled by the remote control handset. In this
case, the front panel buttons (except the Switch On/Off button)
will not work.
6/((37,0(5
&+,/'/2&.
/$1*8$*(
2))
2))
(1*/,6+
Selecting Menu Language
Menu language can be chosen by pressing “ ” or “ ” button
on LANGUAGE item.
6/((37,0(5
&+,/'/2&.
/$1*8$*(
2))
2))
(1*/,6+
To Store Settings
In Feature menu all settings are stored automatically.
Install Menu
• To enter the Install menu directly, press the BLUE button, or
• Press " " button, now you are in Main menu. In the Main
menu, select “ INSTALL. ” using “ “ or “ ” button. Then enter
the Install menu pressing “ ” or “ ” button.
Selecting Programme
To select programme number, you can use “ ” or “ ” button,
Digit Buttons or The Double Digit button with digit buttons.
352*5$00(
%$1'
67$1'$5'
6($5&+
),1(781,1*
6725(
9+)
%*
Selecting Band
BAND, can be chosen either,
• VHF1, VHF3 or UHF by “ ” or “ ” button.
Selecting Standard
The " Standard " setting is fixed to " I ". You cannot change this
item's setting.
Selecting Search
To start the search process, press “ ” button for forward
search or “ ” button for backward search.
SEARCH item
blinks during search process, since the process is stopped
or signal is found. During search process the semi-transpar-
ent menu background becomes " BLUE ". To stop the search
process “ ” or “ ” button must be pressed again.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjustment (af-
ter coarse adjustment), if you are not happy about the image
on the screen.
ENG-(C1426R)-3716-AV-3040-AK36-MN1P-VST-BSI-T3X-5003XXXX.p65 18.04.2003, 09:54 10