Manual Tuning
Manual tuning need only be used for
a)
Tuning and storing other equipment connected in the aerial system
b)
Moving Auto-tuned channels, (see Move Stored Channels below).
c)
To reduce unwanted interference.
Press the YELLOW key twice. The
SETUP
menu will appear on your screen. See illustration in step 4 of
Tuning Your Television.
The TUNING menu will appear on the screen.
a) Press or to enter the VCR channel
number 00.
b) Press to move the cursor to
MANUAL
.
Press the GREEN key.
c) Press to start manual tuning. Each time a
channel is found the search will stop.
TUNING
d) Press again until the channel you want is found.
e) Press to move the cursor to
STORE.
f) Press to store the settings.
g) Press the TV key to return to television viewing .
Move Stored Channels
Note:
Make sure you are in television mode by pressing the
TV
key before continuing.
Press the YELLOW key twice. The
SETUP
menu will appear on your screen. See illustration in step 4 of
Tuning Your Television.
Using the
Arrow
keys , , , , on your remote control, move the cursor onto the channel you want to move.
Note:
Moving a stored channel will copy your choice into its new location erasing any channel already stored there.
Press the GREEN key.
MANUAL
Note:
To clear the old channel location, select the
SETUP
menu, (
Green
key), move the blue bar with the
Arrow
keys to the old
channel number, press and hold the
Yellow
key (
SKIP
) until the
SKIP
prompt disappears.
Picture Controls Menu
Press the GREEN
key.
PICTURE
1
2
1
TUNING
PROG
00
BAND
UHF
MANUAL
››››
FINE
››
›
››››
STORE
SETUP
Select
∨
∧
Adjust
<
>
1
The PICTURE menu will appear on your screen.
a)
Press or to move the cursor onto the picture
control you want to adjust, (e.g. Brightness).
b)
Press or to adjust the brightness setting.
Repeat steps a and b until you complete your adjustments.
c)
Press to move the cursor to STORE.
d)
Press or to store the settings.
e)
Press the TV key to return to television viewing.
Page 4
PICTURE
BRI
›››
CON
›››››
COL
››››
SHARP
››
STORE
Select
∨
∧
Adjust
<
>
2
TUNING
PROG
00
BAND
UHF
MANUAL
››››
FINE
››
›
››››
STORE
SETUP
Select
∨
∧
Adjust
<
>
The manual
TUNING
menu will appear on your screen.
a)
Use the
Arrow
keys to change the programme
number.
b)
Use the
Arrow
key to move the blue bar to
STORE
.
c)
Press or to store the new number.
