--- 10 ---
(5) Lubrication
Literally apply the designated lubricants as follows:
Within the Gear Cover
[28]
................................................. Grease (SEP-3A) Code No. 930035
9 g
Apply the above grease to the pinion teeth of the Armature
[25]
entirely.
(6) Internal wire arrangement
Connect internal wire as illustrated in Fig. 4 to Fig. 8. At this time, ensure that none of the wires are pinched
between components during assembly.
(4) Reassembly of the Lock Lever
[26]
(See Fig. 3.)
A. Position the Lock Lever
[26]
between the fan and the
Ball Bearing 6202VVCMPS2L
[35]
of the Armature
[25]
,
and carefully assemble it together with the Armature
[25]
into the Gear Cover
[28]
.
B. Ensure that both ends of the spring on the Lock Lever
[26]
are properly supported inside the ribs of the Gear
Cover
[28]
.
C. When assembly of the Lock Lever
[26]
is completed
(when the Gear Cover
[28]
has been assembled to the
Housing Ass'y
[65]
and fastening with the Machine
Screws (W/Washers) M5 x 40 (Black)
[60]
), push the
Lock Lever
[26]
by hand and ensure that it returns to its
original position when released.
Fig. 3
[28]
[28]
[26]
Spring
Rib
