24
English
Fence
A
B
Fence
A
B
Table on Base
Table on Base
6mm Knob Bolt
6mm Wing Bolt
Crown molding Stopper (R)
(optional accessories)
Crown molding Vise Ass’y
(optional accessories)
6mm Knob
Bolt
Crown molding Stopper (L)
(optional accessories)
Fig. 46-a
Fence
Table on Base
B
Table on Base
Fence
A
B
A
Bevel Angle Scale
Fence
Turntable
1
4
Base
Miter Angle
Scale
Fence
Turntable
Bevel Angle Scale
Base
Miter Angle
Scale
2
3
Head
Head
Fig. 40
Fig. 41
(3) Setting to cut crown moldings at positions
1
and
4
in Fig. 36 (see Fig. 42; tilt the head to the right):
1
Turn the turntable to the right and set the Miter Angle as follows:
* For 45° type crown moldings:
35.3° ( mark)
* For 38° type crown moldings:
31.6° ( mark)
2
Tilt the head to the right and set the Bevel Angle as follows:
* For 45° type crown moldings:
30° ( mark)
* For 38° type crown moldings:
33.9° ( mark)
3
Position the crown molding so that the upper surface (
B
in Fig. 35) contacts the fence as indicated
Fig. 44.
(4) Setting to cut crown moldings at positions
2
and
3
in Fig. 36 (see Fig. 43; tilt the head to the right):
1
Turn the turntable to the left and set the Miter Angle as follows:
* For 45° type crown moldings:
35.3° ( mark)
* For 38° type crown moldings:
31.6° ( mark)
2
Tilt the head to the right and set the Bevel Angle as follows:
* For 45° type crown moldings:
30° ( mark)
* For 38° type crown moldings:
33.9° ( mark)
3
Position the crown molding so that the lower surface (
A
in Fig. 35) contacts the fence as in Fig. 45.
Fig. 42
Fig. 43
Fig. 44
Fig. 45
Cutting method of crown molding without tilting the saw blade.
(1) Crown molding Stopper (L) and (R) (optional accessories) allow
easier cuts of crown molding without tilting the saw blade.
Install them in the base both-sides side to be shown in Fig. 46-
a. After inserting Tighten the 6mm knob bolts to secure the
crown molding Stoppers.
[Optional accessories used]
• Crown molding Vise Ass’y (Include Crown molding Stopper
(L))
• Crown molding Stopper (L)
• Crown molding Stopper (R)
