Hitachi BRD-E2-30K Скачать руководство пользователя страница 8

Страница: 8 / 34

- 1 -

1. UNPACKING INSPECTION

Handle the product with care when unpacking. Do not use any excessive force (impacts,
vibration, etc.) on the package. Check the following:

(1) Package damage occurring during delivery
(2) Model name, voltage, etc. (order confirmation)
(3) List of accessories (including operation manual)

2. IMPORTANT NOTICES

Note the following to improve and perform safe operation of the dynamic braking unit:

DANGER

Never alter or modify the dynamic braking unit.
Improper servicing may cause serious electric shock and/or personal injury.

Note: Do not use the BRD-E2/E2Z braking unit in combination with earlier versions, (e.g.

BRD-VZ or BRD-C1). The operating voltages and terminal configurations are
different and may cause the dynamic braking units to malfunction.

Note: Set the DIP switches and connect the wires correctly when setting or changing the

operating voltage or when running devices in a parallel connection. Be sure to turn
off power to the dynamic braking unit before setting the DIP switches and the
connecting wires. (For more information, see "4. Wiring and Function Setting.")

Note: Check wirings and connections carefully. If they are correct you can turn on the

power to the inverter.

Содержание BRD-E2-30K



































Результаты поиска

Содержание BRD-E2-30K

Отзывы:

Похожие инструкции для BRD-E2-30K

Бренды по названию

Популярные бренды

Hitachi BRD-E2-30K, Руководство по эксплуатации

Результаты поиска

Содержание BRD-E2-30K

Отзывы:

Похожие инструкции для BRD-E2-30K

Бренды по названию

Популярные бренды