Mains supply: ............220-240V ~50Hz
Power consumption:.... 600W
Max operating period:..2 minutes
Because we continually strive to improve our products we may
change specifications and designs without prior notice.
Warning. This blender must NOT be earthed.
Disconnect from the mains before cleaning the blender.
Make sure no water enter the inside of the appliance!
Never immerse the blender or base in water and keep the
electrical contacts dry!
Clean the blender exterior with a soft damp cloth.
Do not use abrasive cleaners or scouring pads which may
damage the finish of the blender.
Rinse the jar under running water.
Should there be a need, the blade assembly can be cleaned
separately. Turn the blade anti-clockwise and the part holding
the blade in place clockwise.
Only use water and dishwashing liquid to clean the blender.
Never put any parts in the dishwasher.
specifications
Cleaning
safety first
Always remove the main plug from the socket when you have finish using the
blender, before you clean the blender, before you put on or remove the
container or if any faults occur.
Wait until the blade have stopped rotating before you remove the jug.
Never use this blender without a lid.
Do not put your hands or any utensils such as forks or spoons into the jug while
the blades are rotating.
Do not immerse in water.
Children should never be allowed to use this blender.
Never leave the appliance plugged in when there are young children around.
Keep the mains lead away from heat.
Do not use the blender if the mains lead or the housing are visibly damaged.
Repairs must only be carried out by qualified electricians.
This blender has been designed for domestic quantities only and is not suitable
for commercial use.
This appliance complies with the appropriate EMC safety directives.
Always place the blender on a firm and level surface.
for the sake of the
environment
Do not simply throw the packaging away. Cardboard packaging can be taken to
your local waste paper collection point. Deposit plastic bags made of
polyethylene (PE) at PE collection points. Please ask you local authority for the
address of your nearest recycling depot.
Do not operate the blender with a damaged cord
or plug or if the blender malfunctions or has
been dropped or damaged in any way.
I
f the power cord becomes damaged, it must be
replaced by your service agent or qualified
person to prevent a hazard. Please contact the
store where you bought your blender
blender
BLN2
-2-
Содержание BLN2
Страница 1: ...model BLN2 BLENDER ...
