Hitachi BD-W80MV, Руководство по эксплуатации и установке

Страница: 13 / 32

3WPL073501-1
12 13
How to Use the Washing Machine
■
Pause the program.
Press the START/PAUSE button. The washing machine switches
itself off if it is not restarted within 1 hour. Switch the power on and
the program starts again from the beginning.
■
Do not add clothes part way through a wash.
The washing machine first detects the laundry size and the optimum
amount of water, program duration, etc. are determined. Do not add
clothes after the selected program starts.
■
Terminate the program.
Press the START/PAUSE button, and press the POWER button to
switch power off. Then press the POWER button again and select
the Spin or Drain program to drain remaining water in the drum and
spin-dry the laundry.
■
The buzzer sounds when the program ends.
By pressing the SPIN button for 3 seconds, (After press POWER
button) the buzzer sound is deactivated. By pressing the SPIN button
again, the buzzer sound is reactivated.
■
The washing machine automatically switches itself off when the
program ends.
Note
- Do not use blanket net. This may cause excessive vibration when
spinning.
1. Load the laundry :
■
Fold a large items such as a duvet or blanket as follows.
■
Load laundry into the drum with the ends facing the rear of the drum.
Laundry ends facing
rear of drum
Push laundry inside
not to exceed this line
Drum
2. Press the POWER button to switch power on.
3. Select the Duvet program.
4. Add detergent into the detergent dispenser
5. Press the START/PAUSE button.
How to Use the Washing Machine
Washable Items with the Duvet program :
● Washable Duvets
Machine washable duvets stuffed with not more than 1 kg of down or
synthetic material (polyester).
- Do not wash duvets stuffed with wool or duvets with a silk covering.
- Do not add other items in the same wash.
● Washable Blankets
Synthetic blankets weighing not more than 2.5 kg.
- Do not wash pure woolen, long pile or electric blankets.
● Other Items
Bed pads and curtains weighing not more than 2.5 kg.
■
Use this program separately from any washing program.
1. Press the POWER button to switch power on.
2. Select the Tub Clean program.
3. Press the START/PAUSE button.
4. The Remaining Time indicator shows ‘- - -’ and starts blinking, and
stops blinking after 1-2 minutes. Then press the START/PAUSE button
to pause the program.
5. Open the door and add the tub cleaner directly to the drum. Do not use
detergent for washing clothes.
6. Close the door and press the START/PAUSE button to restart the
program.
Your washing machine features Intelligent Sensor Systems that detect
laundry size, fabric type and water temperature, and then control the
method of washing to maximize energy and water saving.
When the Cotton course with the Cold water setting ( symbol is shown
on the display) is selected, after laundry size, fabric type and water
temperature are detected, the optimum amount of water, wash/rinse/spin
times, spin speed and number of rinses are determined for eco-friendly
operation.
Water
Temperature
Fabric
Type
Laundry
Size
Amount of water
Wash time
Rinse time
Spin time
Spin speed
No. of rinses
How to use the
Tub Clean program
Eco-friendly
operation