Hitachi AX-M140, Инструкция по эксплуатации

Страница: 10 / 35

- 9 -
z
This unit has a loudness function, it can automatically increase bass sound effect at low
volume (the higher the volume, the smaller bass increase), which improves the output
sound. You only need to press the loudness button (
LOUD
) to obtain the loudness
function when it is playing.
z
This unit has three brightness levels for adjusting the display brightness.
In standby mode , press the clock dimmer button (
CLK DIM
), for the desired brightness
level.
You can adjust the sound reproduced simply by choosing from different preset equalizations.
Press the preset equalizer button (
P-EQ
) once by once to select cyclically one of the follow-
ing different preset equalizations:
Press the OSD button to display the playing information of the disc on the TV screen.
Load a general disc, upon finishing reading the disc in PBC OFF mode, you can select
tracks or chapters by number buttons (0/10,1-9,10+) and play.
* If the track or chapter number is less than 10, press the number buttons 0/10,1-9.
* If the track or chapter number is over 10, press 10+ button and press the one of the
number buttons 0/10,1-9. ( Note: If the track or chapter number over 20, press 10+ button
twice and press the one of the number buttons 0/10,1-9.)
z
If the general disc is recorded in menu, you can set the playback control function to “PBC
ON” mode by pressing the PBC button (
MENU
). The unit reads the disc and the menu will
display on the TV screen, then use the number buttons to select the desired track.
z
When playing DVD disc, press the root button (
MENU
) to return to the root menu for
previous layer.
z
If your DVD disc has one or more music chapters or titles, you can setup playing order for
the disc by this button. Press the program button, TV set display is as following:
* Use the 0/10,1-9,10+ buttons to input the sequence number which you want to
program playing (the first selection is title and the second selection is chapter of the
programs menu.). After finishing program, Press the , , , buttons to select “Start”
then press the
ENTER
button to start programmed play. (If you setup disc playing order
over 10, press the “
G
” to setup.)
01 TT:__ CH: 06 TT:__ CH:
02 TT:__ CH: 07 TT:__ CH:
03 TT:__ CH: 08 TT:__ CH:
04 TT:__ CH: 09 TT:__ CH:
05 TT:__ CH: 10 TT:__ CH:
Exit Start
G
Note: TT: Title
CH: Chapter
POPS : Vocal sound is intensified
JAZZ : For jazz
CLASSIC : For classic
ROCK : For rock
USER : Tuned (Bass and Treble) by user
No display : Normal sound