Hitachi AllPlay Adaptor, Руководство пользователя

Страница: 7 / 22

HITACHI Allplay Adaptor User`s Guide
6
※
Preparation
: Before you use your AllPlay Adaptor to
playing music, connect speakers with 3.5mm line through the AUX
hole.
Wi ‐ Fi input setup
You can stream music to your speaker from a mobile device on your
Wi ‐ Fi network by using the “Hitachi Wi ‐ Fi Speaker” app. To use this
feature, the speaker must join the same network as the mobile device.
Chose a network setup option from below:
1) Using a mobile device for setup. (See page)
You can set up this speaker’s Wi ‐ Fi setting by using a mobile device
such as a smartphone or tablet.
2) Using WPS (Wi-Fi Protected Setup) (See page)
If your wireless router supports WPS, you can set up the speaker’s Wi ‐ Fi
connection by pressing the WPS button.
1. Using a mobile device for Wi ‐ Fi setup
Note:
Make sure that DHCP is enabled for the network settings
on your Wi ‐ Fi router.
1.
Turn the speaker on and wait for it to completely boot up. It will take
approximately 60 seconds, and during this time the Wi ‐ Fi LED will blink
RED and WHITE. When boot up is complete the Wi ‐ Fi LED will blink
WHITE.
Note : If the Adaptor has been previously setup with another network
or if you wish to re ‐ setup the Adaptor, you will have to set the Adaptor
to Wi ‐ Fi setup mode (Access Point Mode). To set the Adaptor to AP
Mode press the “WPS” button once on the Adaptor, the Wi ‐ Fi LED will
then blink RED indicating that the unit is ready for setup.
1. Go to the Wi ‐ Fi settings on the mobile device.
2. Select “HITACHI AP Adaptor XXXXX XX_XX” on mobile devices.
Note: “X” will be digits that are unique to each Adaptor.
4. Start the Internet browser on the mobile device to display the setup
page.
Note: IOS ‐ The setup page will automatically be displayed.
Android OS ‐ After you open the Internet browser, the setup