Hitachi 53SWX10B, Руководство по обслуживанию

Страница: 49 / 171

2.1
2
.6 Magic Focus Initialize
Adjustment Preparation
(1) Receive any NTSC signal. (Set is in Normal mode.)
(2) Digital convergence adjustment should have been
completed.
(3) Set is in DCU adjustment mode.
Adjustment Procedure
(1) Press PIP MODE and then PIP CH to initialize
Magic Focus. The initialize operation starts and
several windows appear during this operation. It
takes about 30 seconds or less.
(2) When green dots appear, initialize operation is
finished.
(3) Turn power OFF.
REMARKS
Another way to start the initialize operation:
(1) Press SERVICE ONLY Sw. on CONVER/FOCUS
PWB to set DCU adj. mode.
(2) Press [PIP MODE] key on R/C. Then ROM
WRITE? is displayed for alarm. Next, press [PIP
CH] key on R/C to start initialization. When green
dots appear, initalization operation is finished.
NOTE: If there is an error message, red dots or an error
code, refer to page 5
6
, CONVERGENCE
ERRORS.
*[PIP MODE]* key is same function as current [MOVE]
key.
*INITIAL:N*
Initialization Operation