Hitachi 46UX16B, Руководство по эксплуатации

Страница: 3 / 64

IMPORTANT
3
IMPORTANT
Follow all warnings and instructions marked on this television receiver.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
TELEVISION SYSTEM TO RAIN OR MOISTURE.
NOTE: • There are no user serviceable parts inside the receiver.
• Model number and serial number are indicated on the back
side of the set.
POWER SOURCE:
This projection color TV is designed to operate on 120 volts 60 Hz, AC
household current.
Insert power cord into a 120 volt 60 Hz outlet.
TO PREVENT ELECTRIC SHOCK, DO NOT USE THE TELEVISION'S
PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET
UNLESS THE BLADES AND GROUND TERMINAL CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
NEVER CONNECT THE TV TO 50 Hz, DIRECT CURRENT, OR ANYTHING
OTHER THAN THE SPECIFIED VOLTAGE.
NOTE: This television receiver will display television closed captioning ( or
), in accordance with paragraph 15, 119 of the FCC rules.
CAUTION: Never remove the back cover of the set as this
can expose you to very high voltages and other hazards. If the set does not
operate properly, unplug the set and call your dealer or service shop.
HITACHI's 60SX8B, 60SX9K and 50SX6P employ state-of-the-art computer
circuits to enhance picture performance. Should your projection TV become
unplugged from the AC wall outlet or lose AC power due to a local power
failure, please wait at least 30 seconds following the return of power before
turning on your TV. This will allow the computers time to check/ correct any
internal errors caused by the loss of power.