Hitachi 46F500A, Руководство по обслуживанию

Страница: 128 / 162

128
DP33KA/B
During Removal
CAUTIONS WHEN CONNECTI NG/DIS CONNECTING THE HV CONNECTOR
Silicon Cover
less than 1mm
During Insertion
3. Confirm the co ntact by pulling the connector slightly.
(Don't pull hard because it m ay damage the connector.)
4. Cover the high voltage outpu t by carefully pu shing
silicon cover on to it. (Don't turn the conn ector.)
(REMARK)
1. Make sure the silicon cover is
covered the h igh voltage output.
Fig.B
L position L position
wing
wing
Silicon cover
PS process
F.B.T
Çn
Çn
Çk Çk
Fig. A
PUSH
PUSH
(UFPK) FOCUS PACK ASY.
PAING EACH COLOR
BLUE
GREEN"@ RED
PAINT EACH COLOR
FOCUS PACK
BACK SIDE
BLUE GREEN"@ RED
CONNECT EACH COLOR
SCREEN LEAD FROM CPT P.W.B.
LEAD COLOR:ORANDE
CONNECT[FS]CONNECTOR
FROM FBT.
WRAPPING & SOLDER
(DF)CONNECTOR BLACK
(DF)CONNECTOR RED
(NFP1)UL TUBE No.3 L=50mm
CPT SOCKET HOLDER
#231
#234
1. Roll out "@silicon cover from FBT's
contact area slowly.
2. While turnin
g the connector about
"@90 degrees following the arrow
(0 position). Push the conn ector
slightly towards the case. (Fig.A)
3. Remove the connector slowly by
pulling it awa
y from the case .
1. Please refer to direction fo r insertion as s hown in Fig.B
(L position) Insert connecto r till $CLICK$ sound is heard.
2. Make sure the connector is pr essed right in, so that it
has a good contact with th e spring.
CONNECT EACH COLOR
FOCUS LEAD FROM CPT P.W.B.
LEAD COLOR:IVORY
(NFP2)SK BINDER
CPT SOCKET
HOLD BAND
NOTE:(2) CPT SOCKET HOLDER ASSEMBLY.(R.G.B)
CPT SOCKET HOLDER ASSEMBLY SHOULD
BE FOLLOWE
D BELOW FIG.
WIRING DRAWING