Hitachi 42PMA400E, Руководство по обслуживанию

Страница: 10 / 34

Error code table (H1 panel)
Suspected faulty board
(In the order of higher probability of defect)
ERR
Code
Detect
position
(board)
Contents
(1) (2) (3) (4) (5) (6) (7)
Remarks
04 LOGIC 3.3V power voltage has dropped LOGIC PSU
06 3.3V power startup is faulty X-SUS Y-SUS ADM1 - 8 PSU ABUS-L ABUS-R LOGIC
18 Internal I2C_SCL1_LOW level LOGIC
19 Internal I2C_ACK does not respond LOGIC
1C EEPROM initial setting is defective LOGIC
1D EEPROM write-down is defective LOGIC
1E EEPROM user initial setting is defective LOGIC
1F EEPROM factory setting reading is defective LOGIC
24 X-SUS Vex power voltage has decreased X-SUS LOGIC
25 Vex power voltage is excessive X-SUS
26 Vex power startup is faulty. X-SUS LOGIC
28 Vx power voltage has dropped X-SUS LOGIC
29 Vx power voltage is excessive X-SUS
2A Vx power startup is faulty. X-SUS LOGIC
2C Vpx voltage has dropped X-SUS LOGIC
2D Vpx voltage is excessive X-SUS LOGIC
30 Vpx1 voltage has dropped X-SUS LOGIC
31 Vpx1 voltage is excessive X-SUS LOGIC
34 Vpx2 voltage has dropped X-SUS LOGIC
35 Vpx2 voltage is excessive X-SUS LOGIC
39 Vs power current is excessive (during operation) X-SUS Panel LOGIC
3B Vs power current is excessive (during startup) X-SUS Panel LOGIC
44 Y-SUS Vey power voltage has dropped Y-SUS LOGIC
45 Vey power voltage is excessive Y-SUS
46 Vey power startup is faulty. Y-SUS LOGIC
4C Vpy voltage has dropped Y-SUS LOGIC
4D Vpy voltage is excessive Y-SUS LOGIC
50 Vpy1 voltage has dropped Y-SUS LOGIC
51 Vpy1 voltage is excessive Y-SUS LOGIC
54 Vpy2 voltage has dropped Y-SUS LOGIC
55 Vpy2 voltage is excessive Y-SUS LOGIC
59 Vs power current is excessive (during operation) Y-SUS Panel LOGIC
5B Vs power current is excessive (during startup) Y-SUS Panel LOGIC
5D Vs power current is excessive (during operation) Y-SUS SDM Panel LOGIC
61 PSU Vs power voltage is excessive PSU LOGIC
62 Vs power startup is faulty. X-SUS Y-SUS PSU LOGIC
64 Vex and Vpy power voltage has dropped LOGIC X-SUS Y-SUS
65 Vex and Vey power voltage is excessive X-SUS Y-SUS
66
X-SUS
Y-SUS
Vex and Vey power startup is faulty. LOGIC X-SUS Y-SUS
68 X-SUS Vw power voltage has dropped Y-SUS X-SUS LOGIC
69 Vw power voltage is excessive X-SUS
6A Vw power startup is faulty. Y-SUS X-SUS LOGIC
6C Vpx and Vpy voltage has dropped LOGIC X-SUS Y-SUS
6D
X-SUS
Y-SUS
Vpx and Vpy voltage is excessive LOGIC X-SUS Y-SUS
10