- 8 -
The Plasma monitor is a very high technol-
ogy product giving you fine picture details
.
Occasionally, a few non-active pixels may re-
main still on the screen. Please note that
this is not a fault and does not affect the per-
formance of your product. Long-time unmov-
ing still pictures may cause permanent
shade effect on the screen even after the
picture has been changed, its influence
lasts as ghost picture. This ghost effect may
disturb the user even though it diminishes in
the course of time. To prevent this, DO NOT
LEAVE STILL PICTURES FOR EXAMPLE
FROZEN PICTURES ON THE SCREEN
FOR A LONG TIME.
DO NOT LEAVE YOUR MONITOR AT
STAND-BY OR OPERATING WHEN YOU
LEAVE YOUR HOUSE
Batteries, including those which are heavy
metal-free, should not be disposed of with
household waste. Please dispose of used
batteries in an environmentally sound man-
ner. Find out about the legal regulations
which apply in your area.
Before Switching On Your
Monitor
Power Connection
IMPORTANT:
The monitor is designed to op-
erate on
230-240V AC, 50 Hz.
After unpacking, allow the monitor to reach
the ambient room temperature before you
connect the set to the mains.
How To Connect Devices
IMPORTANT:
Switch off the monitor before
connecting any external device.
Sockets for external connections are at the
back of the monitor. For connection of de-
vices refer to the manuals.
Inserting Batteries In The Remote
Control Handset
Place the batteries in the right directions as
seen below.
Remove the battery cover located on the
back of the handset by gently pulling up-
wards from the indicated part.
Insert two
MN2400 AAA
or equivalent type
batteries inside.
Replace the battery cover.
NOTE:
Remove batteries from remote con-
trol handset when it is not to be used for a
long period.Otherwise it can be damaged
due to any leakage of batteries.
01-ENG-HITACHI 4205 PLASMA SCART MONITOR IB-50059791.p65
11.01.2005, 16:31
8
