Once the TV has found all your local stations, they are then automatically assigned a
programme number and name, if available from the broadcast.
If you would like to change the programme number or order, please refer to the Program Menu
section of the instruction book.
important note before starting Auto Setup
important note.
start A.P.S. (Auto Programming System)
GB
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV
please ensure that they are switched on before automatic tuning begins. In the case of
a VCR, insert a pre-recorded tape and begin playback of your equipment. These
measures ensure that all your external equipment is tuned in during the Auto Setup
procedure.
Press the
button when search is completed.
1
2
GB
APS is running...
UK - I
055,25 Mhz
Cancel
When the TV is turned on for the first time, it is in the digital mode. Because this is
the first time the TV is used, there are no channels stored in the memory and the
message shown at right side appears on the screen.
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes
No
To start installation process, press Yes.
To cancel searching, you can press
the “ ” button at any time during the process.
3
After Automatic Search process is completed, a message asking for analogue
channel search appears on the screen. TV switches to the analogue TV mode.
MENU
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
Cancel searching
AUTOMATIC SEARCH
Channels:
12 %
Yes
Do you want to search for
analogue channels?
No
4
First of all choose
and
by using
/
and
/
buttons.
This will affect the sort process in APS. To start APS, press the RED or “
”
button.
Language
Country
OK
WARNING !
Country
UK
All prestored programs
OK
Cancel
PROGRAM
will be deleted
5
