Hitachi 42EDT41A, Руководство по обслуживанию

Страница: 28 / 89

28
PW1A
CMP420V1 / CMP420V2 / 42EDT41 (PW1A)
5
.
SERVICE MODE ACCESS
BURN-IN MODE
BURN-IN MODE
When the Burn-in feature is turned ON, the plasma panel operates normally on all inputs that
have a signal. On inputs that do not have a signal, the plasma panel displays a cycling single
color test pattern (see below) which is generated internally. This can be helpful to determine
if the panel is capable of displaying anything.
NOTE:
1st number indicates normal button operation
2nd number indicates function during MENU
Rear Label
7 6 5 4 3 2 1
- +
OK
2. VOL
2. ADJ
1. SUB POWER
3. VOL
3. ADJ
4. PROGRAM
4. SELECT
5. PROGRAM
5. SELECT
6. INPUT SELECT
6. OK
7. MENU
1 2 6
BURN-IN MODE (ON)
With unit in standby mode
(turned off), press and hold: >
After the unit comes on, continue to hold the
buttons down until the initial OSD goes
away. OSD will then appear indicating that
BURN-IN MODE is engaged.
(OSD >
Burn In On
)
1 2
BURN-IN MODE (OFF)
With unit in standby mode
(turned off), press and hold: >
After the unit comes on, continue to hold the
buttons down until the initial OSD goes
away. OSD will then appear indicating that
BURN-IN MODE is disengaged.
(OSD >
Burn In Off
)
White Yellow Cyan Green Magenta Red Blue Black
7