Hitachi 37HLX99 - LCD Direct View TV, Руководство по эксплуатации

Страница: 5 / 96

B
A
(a) Power Swivel
NOT USED
(b) Power Swivel
USED
A B
4 in. 12 in.
10 cm 30 cm
37
"
5
Securing to a table-top
1. Using wood screws (two) fasten the set to the
clamping screw holes on the rear of the
LCD
TV stand as shown below.
2. Using commercially available wood screws, secure
the set firmly in position.
Securing to a Wall
1.Keep the LCD television 4 inches away from the
wall except when mounted using the wall mount
bracket.
2. Secure the television to the wall as shown .
NOTES: 1. Do not block the ventilation holes of the
LCD
Television. Blocking the ventilation
holes might cause fire or defect.
2. In case of an abnormal symptom, unplug
the AC cord.
3
.
If you purchased the wall mount
bracket
option, please ask for
professional installer.
Do not install by yourself.
4.
Install the unit at a proper area where it does
not expose anyone to any danger of hitting
themselves (for example their hands, head
or face, etc.) against the edge of the unit and
cause personal injury.
Caution when moving the main unit
As this product is heavy, whenever it is moved, two
people are required to transport it safely. Whenever the
unit is moved it should be lifted forward using the top
and base on both sides of the Television for stability.
When moving the Television, lift the handles
and the
botttom frame as shown below.
ANTENNA
Unless your LCD Television is connected to a cable
TV system or to a centralized antenna system, a good
outdoor color TV antenna is recommended for best
performance. However, if you are located in an
exceptionally good signal area that is free from
interference and multiple image ghosts,
an indoor antenna may be sufficient.
LOCATION
Select an area where sunlight or bright indoor
illumination will not fall directly on the picture screen.
Also, be sure that the location selected allows a free
flow of air to and from the perforated back cover of the
set. In order to prevent an internal temperature
increase, maintain a space of 10 cm (4 inches) from the
sides/back of the Television, and 30 cm (12 inches)
from the top of the television to the wall. To avoid
cabinet warping, cabinet color changes, and increased
chance of set failure, do not place the TV where
temperatures can become excessively hot, for
example, in direct sunlight or near a heating appliance,
etc.
To take measures to prevent the LCD Television from tipping over and prevent possible injury
it is important to mount the unit in a stable and flat surface.
First time use
How To Set Up Your New Hitachi LCD Television
*
Please adjust the wire length to avoid
touching the wall when turning the TV.
37
”
30 cm (12 inches)
10 cm (4 inches)
10 cm (4 inches)
CONNECT POWER SWIVEL CABLE
Connect one end of cable (Arrow mark facing left) to
the swivel slot of the
LCD Rear Panel. Connect the
other end (Arrow mark facing front)to the swivel slot of
the Table Top Stand.
TURNING RADIUS
The maximum turning radius is 30˚ (left and right). Do
not place any objects on the path of the monitor when
using the power swivel feature.
C
D
C D
10.59 in. 1 3.93 in.
27 cm 3 6 cm
37
"
5
. If the Power Swivel feature will not be
used, the
LCD
television should be
secured to the wall as shown in
fig. (a).
6
. If the Power Swivel feature will be
used,
the
LCD
television should be
secured
to the wall as shown in
fig. (b).
Wood screw
two places
Wire