Hitachi 32HE2200, Инструкция по эксплуатации

Страница: 24 / 45

English - 22 -
Setup Home
Transponder (*)
Using this menu, you can edit the main and backup home transponder parameters,
including the Pid of the related M7 operator, which are used to download the channel
list. Set your preferences and press the Green button to save the settings. Then start
an M7 operator installation using the Automatic channel scan>Satellite menu.
(*) This menu option will only be available if an M7 operator installation is performed.
Clear Service List
Use this setting to clear channels stored. This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or Finland.
Select Active
Network
This setting allows you to select only the broadcasts within the selected network to be
listed in the channel list. This feature is available only for the country option of Norway.
Signal Information
You can use this menu item to monitor signal related information such as signal level/
quality, network name etc for available frequencies.
First time installation
Deletes all stored channels and settings, resets TV to factory settings.
System Menu Content
Conditional Access
Controls conditional access modules when available.
Language You may set a different language depending on the broadcaster and the country.
Privacy Settings
Manage your privacy privileges for smart TV related applications. Press OK to enter the
menu and set according to your preferences.
Parental
Enter correct password to change parental settings. You can easily adjust Menu Lock ,
Maturity Lock , Child Lock or Guidance in this menu. You can also set a new PIN
or change the
Default CICAM PIN
using the related options.
Note: Some menu options may not be available depending on the country selection in the First Time
Installation . Default PIN could have been set to 0000 or 1234. If you have defined the PIN(is requested
depending on the country selection) during the
First Time Installation
use the PIN that you have defined.
Date/Time
Sets date and time.
Sources
Edit the names, enable or disable selected source options.
Accessibility Displays accessibility options of the TV.
High Contrast
Increase the contrast of the menu options and texts to make them easier to read. White
Text , Yellow Text and Off options will be available.
Hard of Hearing Enables any special feature sent from the broadcaster.
Audio
Description
A narration track will be played for the blind or visually impaired audience. Press OK to
see all available
Audio Description
menu options. This feature is available only if the
broadcaster supports it.
Note: Audio description sound feature is not available in recording or time shifting mode.
Dialogue
Enhancement
This feature provides sound post-processing options for speech-gated dialogue
enhancement. Off , Low , Medium and High options will be available. Set according
your preference.
Note: This feature has an effect only if input audio format is AC-4 and this effect only applies to TV loudspeaker
output.
Spoken Subtitles
Default preference of spoken subtitles is selected with this setting option. To make spoken
subtitles priority higher than normal ones, this option should be set to On .
This option may not be available depending on the model of your TV and is only visible
when the source is set to TV .
Magnification
Enables the use of button combinations to magnify the screen. On and Off options
will be available. Set as On to enable.
Magnification support will be enabled or disabled with long-press of the numeric button
5 . First top-left quadrant of the screen will be zoomed. After the magnification support
is enabled, long-press of the numeric buttons 2 , 4 , 6 , 8 will move the zoomed area to
up, left, right and down.