Hitachi 27UX01B-501 Скачать руководство пользователя | Manualshive

Страница: 11 / 56

background image

- 11 -

Programming the Remote

VCR Functions

This remote is designed to operate different brands of VCRs. You must first program the remote to match the
remote system of your VCR.

Procedure

1. Turn ON your VCR.
2. Aim the remote control at the front of your VCR.
3. While holding down the VCR button on the remote, enter the 2-digit preset code that matches your VCR.

(See “Component Codes” on page 12~ page 14.) The remote will turn off your VCR when the correct 2
digit preset code is entered. When this occurs, the remote control is programmed for your VCR. If the VCR
does not turn off after 25 seconds, try a different code, if available.

4. The remote will now control your VCR.

Notes

•

If your VCR will not operate remotely after performing the above procedures, this means that your

VCR’s code has not been coded into the remote. Please consult your VCR’s operating guide.

•

The remote control will remember the codes you have programmed in until the batteries are removed

from the remote control. After replacing the batteries repeat the programming procedure stated
above.

•

If your VCR does not have a remote power function, the remote will issue the CHANNEL UP function.

•

The MENU button will act as the VCR MENU button for HITACHI VCRs.

•

The INPUT button will act as your VCR +100 button, if required.

Cable/Satellite Box Functions

This remote is designed to operate different brands of cable boxes and Satellite boxes. You must first program the
remote to match the remote system in your cable/satellite box.

Procedure

1. Turn ON your cable/satellite box.
2. Aim the remote control at the front of your cable/satellite box.
3. While holding down the CABLE button on the remote, enter the 2 digit preset code (See “Component

Codes” on page 12 ~ page 14) that matches your cable/satellite box. The remote will turn off your cable/
satellite box when the correct 2 digit code is entered. When this occurs, the remote control is programmed
for your cable/satellite box. If the cable/satellite box does not turn off after 5 seconds, try another 2 digit
preset code, if available.

4. The remote will now control your cable/satellite box.

Notes

•

If your cable/satellite box will not operate remotely after performing the above procedures, this means

that your cable/satellite box code has not been coded into the remote. Please consult your cable/
satellite box operating guide.

•

The remote control will remember the codes you have programmed in until the batteries are removed

from the remote control. After replacing the batteries, repeat the entire programming procedure stated
above.

•

If your cable/satellite box does not have a remote power function, the remote will issue the CHANNEL

UP function.

Write the code numbers from tables in this space. This
will serve as a reference if you need to program your
remote control.

CABLE/SATELLITE BOX

VCR

«
...
9
10
11
12
13
...
»

Содержание 27UX01B-501

























































Отзывы:

Нет отзывов

Похожие инструкции для 27UX01B-501

Бренд: Q.Bell Страницы: 31

Бренд: Magnavox Страницы: 58

Бренд: TCL Страницы: 76

Бренд: Sylvania Страницы: 80

Бренд: Daewoo Страницы: 71

Бренд: Akai Страницы: 82

Бренд: Memorex Страницы: 82

Бренд: Uniteck Страницы: 22

Бренд: Hisense Страницы: 6

Бренд: Hisense Страницы: 44

Бренд: Sanus Страницы: 16

Neomounts WL70-550BL12

Бренд: NewStar Страницы: 8

Бренд: Kogan Страницы: 22

Бренд: Mountup Страницы: 11

Бренд: Karma Страницы: 4

Бренд: Telefunken Страницы: 35

Бренд: i3-TECHNOLOGIES Страницы: 5

Бренд: Finlux Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды