background image

 

 

4

 

Surely connect
the ground wire.

 

 

SAFETY INSTRUCTIONS(continued)

 

 

 
 
 

Be cautious of the power cord connection. 

Incorrect connection of the power cord could result in fire or electrical shock. 

• Do not touch the power cord with a wet hand. 

• Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the power plug. 

• Insert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure. 

• Do not cut off the fitted power plug, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an 

appropriate extension lead or consult your dealer. 

• Should you require replacing the fuse in the molded plug with a new fuse, then please replace with new one of the same value, type and   

approval as the original. Ensure the fuse cover is returned to its original position. 

 

Be sure to keep safety ground connection. 

Connect the ground terminal of AC inlet of this LCD TV with the ground terminal provided at the power outlet using the enclosed power 

cord. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet. 

 

Be careful in handling the power cord and external connection cables.

 

If you keep using a damaged the power cord or cables, it can cause a fire or electrical shock. Do not apply too much heat, pressure or 

tension to the power cord and cables. 

If the power cord or cables are damaged (exposed or broken core wires, etc.), contact your dealer. 

• Do not place the monitor or heavy objects on the power cord and cables. Also, do not place a spread, cover, etc, over them because this   

could result in the inadvertent placing of heavy objects on the concealed power cord or cables. 

• Do not pull the power cord and cables. When connecting and disconnecting the power cord or cables, do it with your hand holding the plug 

or connector. 

• Do not place the cord near the heater. 

• Do not touch the power plug just after disconnecting it from the power outlet to prevent electric shock. 

• Do not touch the power plug when lightening is close to you. 

• Avoid coiling the power cord and bending it sharply. 

• Protect the power cord from being walked on, pinched particularly at plugs, conveniences receptacles, and the point where they exit from   

the apparatus. 

• Do not modify the power cord. 

 

Be careful in handling the battery of the remote control.

 

Incorrect handling of the battery could result in fire or personal injury. The battery may explode if not handled properly. 

• Keep the battery away from children and pets. If swallowed consult a physician immediately for emergency treatment. 

• Do not allow the battery to be exposed to fire or water. 

• Avoid fire or high-temperature environment. 

• Do not hold the battery with metallic tweezers. 

• Keep the battery in a dark, cool and dry place. 

• Do not short circuit the battery. 

• Do not recharge, disassemble or solder the battery. 

• Do not physically impact the battery. 

• Use only the battery specified in the manual of this TV. 

• Make sure the plus and minus terminals are correctly aligned when loading the battery. 

• If you observe a leakage of the battery, wipe out the liquid and then replace the battery. If the liquid adheres your body or clothes,   

rinse well with water. 

• Obey the local laws on disposing the battery. 

 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

 

 

Содержание 26HDL52 - LCD Direct View TV





















































Отзывы: