- 32 -
the selected type.
The channel name is set using
_
or
`
buttons
to display the channel which broadcasts the
programme.
The start time, end time and date are each
set with the numeric buttons on the remote
control in 24-hour format.
The frequency mode determines how often
the receiver operates this event and is set
with the
_
or
`
buttons to be either
Once
,
Daily
, or
Weekly
.
+LQW
,IDQLQYDOLGQXPEHUIRUWKHVWDUWRUHQGWLPHV
RUWKHGDWHLVHQWHUHG³(QWHUHGWLPHLVQRW
YDOLG´PHVVDJHDSSHDUVRQWKHVFUHHQ
Note:
You can set timers for the desired broadcast
and time. Recording broadcasts is also possible by
using a recording device that you connect to your
TVs Ext Out. When the timer is due, output will be
provided via the TV-Out and the recording can be
performed by the connected recorder that you have
set.
TV Setup
You can use this item to display the TV
functions.
The digital TV Setup menu screen is
accessed from the main menu. Press the
MENU
button to display the main menu and
use
a
or
b
buttons to highlight
TV Setup
.
Press
OK
button to display TV Setup menu
screen.
0DLQ0HQX
&KDQQHO/LVW
,QVWDOODWLRQ
&RQILJXUDWLRQ
7LPHUV
796HWXS
&RPPRQ,QWHUIDFH
You can find detailed information for all menu
items in
Analogue TV Menu System
section.
Common Interface
Press
MENU
button to display the main menu
and use the
a
or
b
buttons to highlight the
Common Interface
line and press
OK
button.
0DLQ0HQX
&KDQQHO/LVW
,QVWDOODWLRQ
&RQILJXUDWLRQ
7LPHUV
796HWXS
&RPPRQ,QWHUIDFH
It is required to subscribe to a pay channel
company to view the pay channels of the
Digital Terrestrial broadcasting.
Obtain the Conditional Access Module (CAM)
and the viewing card by subscribing to a pay
channel company, then insert those to the
Television using the following procedure.
Switch off the TV and unplug from the mains.
Insert the CAM, and then the viewing card to
the slot that is located in the terminal cover
at the left-hand side of the TV (from front
view).
The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The
CAM or the TV terminal may be damaged if
the CAM is forcefully inserted.
Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Common Interface then pressing
OK
ENG-01-TV-22784W-1165UK-MB29-PEUIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10060401-5013xxxx.p65
11.10.2008, 17:37
32
