Hitachi 20LD2500, Инструкция по эксплуатации

Страница: 18 / 40

- 17 -
not all broadcasters are sending their chan-
nel number information.
Manual Search:
In manual search, the number of the multi-
plex is entered manually and only that multi-
plex is searched for the channels. For every
valid channel number, signal level, signal
quality and network name are shown at the
bottom of the screen.
In both manual and auto search any existing
channel in the database is not re-stored to
avoid redundant duplicates of that channel.
FIRST TIME INSTALLATION
The user can use this item to load default
settings, which had been loaded to the re-
ceiver at the factory.
To install factory settings, highlight “First
Time Installation” menu and press the “SE-
LECT” button, then you will be asked to con-
firm for deleting all channels and settings.
Installation
Add New Channels
First Time Installation
Yes
Your previous digital channel list will be destroyed.
Are you sure you want to delete all digital channels
and settings for first time installation?
No
By selecting YES and pressing the “SE-
LECT” button, the existing channel table will
be deleted.
After factory settings is loaded, “First Time
Installation” menu will be displayed.
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes No
Press the “SELECT” button to start installa-
tion. After search is completed for digital
channels, a message asking search for
analogue channels appears on the screen.
Yes
Do you want to search for
analogue channels?
No
Press the “SELECT” button to search for
analogue channels.The following menu ap-
pears on the screen for analogue channel
search.
down for A.P.S.
A.P.S.
country
A.P.S.
UK
country
By pressing “ ” / “ ” button, select
country.
Press “ ” / “ ” button to select the country
where you are.
A.P.S.
By pressing “ ” / “ ” button, select
A.P.S.
When “ ” button is pressed, the following
warning is displayed.
A.P.S. WARNING
all prestored programs
will be deleted
<M> to cancel <OK> to start
If you want to cancel A.P.S. function, press
the “
M
” button.
If “
OK
” button is pressed, A.P.S. starts and
the following warning is displayed.
A.P.S. is running
Please Wait
<M> to exit
If you press the
“M”
button, A.P.S. function
stops and Program table appears on the
screen.
After APS is finalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers
and names assigned to the programmes.
If you do not accept the locations and / or the
programme names, you can change them
2016-ENG-1549 UK-20 INCH 17MB18 IDTV-(BACK AV)(CMEI)-HITACHI 20LD2500-50087080.p65 15.05.2006, 10:15 17