Hitachi 20LD2400, Инструкция по эксплуатации

Страница: 24 / 33

- 23 -
Camera And Camcorder
To Connect To AV-2 Input
Connect your camera or camcorder to AV-2
input at the rear side of the TV.
• Connect your equipment to the TV via
VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You must connect the jacks to the in-
put using the same colour.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS
input at the rear side of the TV.
• Connect your equipment to the TV via S-VHS
input and audio inputs of AV-2 inputs by us-
ing S-VHS cables.
Connect The Decoder To The
Video Recorder
Some video recorders have a special
SCART Socket for decoder.
• Connect a SCART Lead to the SCART
Socket of your decoder and to the special
SCART Socket of your video recorder. Refer
to the booklet of your video recorder.
• To connect your video recorder to the TV, re-
fer to the TV and Video Recorder section.
If you want to connect more equipments to
your TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket at the
rear side of the TV to connect headphones.
Tips
Care Of The Screen
Clean the screen with a slightly damp, soft
cloth. Do not use abrasive solvents as they
may damage the TV screen coating layer.
Poor Picture
Have you selected the correct TV system? Is
your TV set or house aerial located too close
to the loudspeakers, non-earthed audio
equipment or neon lights, etc.?
Mountains or high buildings can cause
double pictures or ghost images. Some-
times you can improve the picture quality by
changing the direction of the aerial.
Is the picture or Teletext unrecognisable?
Check if you have entered the correct fre-
quency.
The picture quality may degrade when two
peripherals are connected to the TV at the
same time. In such a case, disconnect one
of the peripherals.
No Picture
Is the aerial connected properly? Are the
plugs connected tightly to the aerial socket?
Is the aerial cable damaged? Are suitable
plugs used to connect the aerial? If you are
in doubt, consult your dealer.
No Picture means that your TV is not receiv-
ing any transmission. Have you pressed the
correct buttons on the remote control? Try
once more.
Sound
You can not hear any sound. Did you per-
haps interrupt the sound, pressing the “ ”
button? Are external speakers connected to
the TV?
Sound is coming from only one of the
speakers. Is the balance set to one direction
extreme? See
audio menu.
Remote Control
Your TV no longer responds to the remote
control. Press the “
TV
” button on the re-
mote control once more. Perhaps the batter-
ies are exhausted. If so you can still use the
local buttons at the top of the TV.
Have you selected the wrong menu? Press
the “
TV
” button to return to TV mode or
press the “ M ” button to return to the previous
menu.
No solution:
Switch your TV set off and on. If this does not
work, call the service personnel; never at-
tempt to repair it yourself.