Hitachi Cable WirelessIP 3000 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 132

Hitachi Cable WirelessIP 3000 Скачать руководство пользователя страница 7

- 7 -

Safety precautions

Battery pack (accessories)

z

Failure to follow the items below can cause rupture, fire, heat, battery fluid leakage, electrical shock, and burns.

・

Do not charge the battery pack with any method other than that specified.

・

Do not use this battery pack in any device other than this product.

・

Do not put this product into fire or heat it.

・

Do not solder this product.

・

Do not carry or leave this product with a necklace or other metal.

・

Do not short the terminals of the battery pack.

・

Do not use, charge, or leave near an open fire, near a stove, subject to direct sunlight, or anywhere else that reaches
high temperatures.

・

If any fluid that has leaked from the battery gets in your eyes, do not rub them. There is a danger of blindness, so
immediately wash out your eyes with plenty of clean water and seek immediate medical attention.

・

Use only the battery pack specifically manufactured for the Hitachi Cable WirelessIP 3000. Using a product not
designed for the WirelessIP 3000 would cause danger and would make it impossible to warranty the correct operations
of this product and your communications.

z

Failure to follow the items below can cause rupture, heat, and battery fluid leakage.

・

Do not wrap this battery pack with tape or otherwise process it. This battery pack may emit gas.

・

Do not attempt to disassemble or alter the battery pack.

・

Do not place any tool or other metal or electrically conductive item on the battery pack or let such item fall onto the
battery pack.

・

Keep water and seawater off and out of the battery pack.

z

Failure to follow the items below can cause rupture, heat, battery fluid leakage, rust, and impaired performance

and reduced service life.

・

Do not charge the battery pack longer than the specified time.

・

Only charge the battery pack within the ranges of 0-40°C and 10-90% humidity.

・

Do not use or store in any location that can reach high temperature.

・

Do not charge outdoors in the cold or use while cold.

・

Do not throw this battery pack or subject it to strong mechanical shock.

・

Always switch the power switch Off when the product is not in use.

・

When this product will be left unused for a prolonged period, remove the battery pack and store it in a dry location at a
temperature between 0 and 25°C.

z

Never use paint thinner or benzine to clean this product.

This can cause deterioration of the case or paint peeling. Normally, wipe this product with a soft cloth. If it is quite dirty, dip
the cloth in a little diluted neutral detergent.

Warning

Caution

«
...
5
6
7
8
9
...
»

Содержание WirelessIP 3000





































































































































Отзывы:

Нет отзывов