Hisun HS800UTV, Руководство пользователя

Страница: 147 / 175

Periodic Maintenance and Adjustment 8-49
6. Install the panel by installing the quick
fasteners and bolts, and then tighten the
bolts to the specified torque.
Tightening torque:
Panel bolt:
6.5N·m (0.65 m-kgf ， 4.7 ft-lbs)
Troubleshooting
Although vehicles receive a rigid inspection
before shipment from the factory, trouble
may occur during operation. Any problem
in the fuel, compression, or ignition systems
can cause poor starting and loss of power.
The troubleshooting chart describes a quick,
easy procedure for making checks. If your
vehicle requires any repair, take it to a dealer.
The skilled technicians at a dealership have
the tools, experience, and know how to
properly service your vehicle. Imitation
parts may look like original parts, but they are
often inferior. Consequently, they have a
shorter service life and can lead to expensive
WARNING
POTENTIAL HAZARD
Checking the fuel system while
smoking or near an open flame.
WHAT CAN HAPPEN
Fuel can ignite or explode, causing
severe injury or property damage.
HOW TO AVOID THE HAZARD
Do not smoke when checking the fuel
system. Make sure there are on open
flames or sparks in the area, including
pilot lights from water heaters of
furnaces.