Hisun AXIS 110 Скачать руководство пользователя страница 54

Страница: 54 / 116

6-9 Operation

Accessories and loading

Accessories

Accessories can affect the handling and

control of your ATV. Keep the following in

mind when considering an accessory or

operating an ATV which has accessories.

Choose only accessories designed for your

ATV.

Accessories should be rigidly and securely

mounted. An accessory which will shift

position or come off while you are riding

could affect your ability to control the ATV.

Do not mount an accessory where it could

interfere with your ability to control the ATV.

Examples include (but are not limited to) a

heavy or bulky object attached to the

handlebars which could make steering

difficult, an accessory that limits your ability

to move around on the seat, or one that

limits your view.

Use extra caution when riding an ATV with

accessories.

The

ATV

may

handle

differently than it does without accessories.

Cargo on front and back carrier racks can

change the stability and handling of the

ATV. You must use common sense and

good judgment when carrying cargo. Keep

the following points in mind:

Never exceed the weight limits shown. An

overloaded ATV can be unstable.

Содержание AXIS 110





















































































































Результаты поиска

Содержание AXIS 110

Отзывы:

Бренды по названию

Популярные бренды

Hisun AXIS 110, Руководство пользователя

Результаты поиска

Содержание AXIS 110

Отзывы:

Бренды по названию

Популярные бренды